728056
34
Zoom out
Zoom in
Previous page
1/62
Next page
Configuration
LAN Setup
You can configure the LAN IP address to suit your preference. Many users will find it
convenient to use the default settings together with DHCP service to manage the IP settings
for their private network. The IP address of the Router is the base address used for DHCP.
In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP must
be compatible with the IP address of the Router. The IP addresses available in the DHCP IP
address pool will change automatically if you change the IP address of the Router. See the
next section for information on DHCP setup.
To access the LAN Setup menu, click the LAN Setup button in the Setup directory.
To change the LAN IP Address or Subnet Mask, type in the desired values and click the
Save Settings button. Your web browser should automatically be redirected to the new IP
address. You will asked to login again to the Router’s web manager.
The DHCP server is enabled by default for the Router’s Ethernet LAN interface. DHCP
service will supply IP settings to workstations configured to automatically obtain IP settings
that are connected to the Router though the Ethernet port. When the Router is used for
DHCP it becomes the default gateway for DHCP client connected to it. Keep in mind that if
you change the IP address of the Router the range of IP addresses in the pool used for
DHCP on the LAN will also be changed. The IP address pool can be up to 253 IP addresses.
There are two options for DHCP service:
You can use the Router as a DHCP server for your LAN.
You can disable DHCP service and manually configure IP settings for workstations.
D-Link DSL-2640R User Manual
31
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DSL-2640R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DSL-2640R in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DSL-2640R

D-Link DSL-2640R Quick start guide - All languages - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info