728116

D-Link DI-304 Manual

87
Zoom out
Zoom in
Previous page
1/96
Next page
Appendix B – Basic IP Concepts
This appendix describes some basic IP concepts, the TCP/IP addressing scheme and
show how to assign IP Addresses.
When setting up the router, you must make sure all ports to be utilized on the router
have valid IP addresses. Even if you will not use the ISDN or WAN ports, you
should, at the very least, make sure the LAN port is assigned a valid IP address. This
is required for telnet, in-band SNMP management, and related functions such as
“trap” handling and TFTP firmware download.
IP Addresses
The Internet Protocol (IP) was designed for routing data between network sites all
over the world, and was later adapted to allow routing between networks (often
referred to as “subnets”) within any site. IP includes a system by which a unique
number can be assigned to each of the millions of networks and each of the
computers on those networks. Such a number is called an IP address.
To make IP addresses easy to understand, the originators of IP adopted a system of
representation called “dotted decimal” or “dotted quad” notation. Below are
examples of IP addresses written in this format:
201.202.203.204 189.21.241.56 125.87.0.1
Each of the four values in an IP address is the ordinary decimal (base 10)
representation of a value that a computer can handle using eight “bits” (binary digits
— 1s and 0s). The dots are simply convenient visual separators.
Zeros are often used as placeholders in dotted decimal notation; 189.21.241.56 can
therefore also appear as 189.021.241.056.
IP networks are divided into three classes on the basis of size. A full IP address
contains a network portion and a “host” (device) portion. The network and host
portions of the address are different lengths for different classes of networks, as
shown in the table below.
… 87 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DI-304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DI-304 in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DI-304

D-Link DI-304 Installation Guide - English - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info