728116
69
Zoom out
Zoom in
Previous page
1/96
Next page
DI-304/DI-304M ISDN Remote Router
61
IP Address – Specify a source and destination IP address for this filter
rule to apply to. Placing the symbol "!" before a particular IP Address will
prevent this rule from being applied to that IP address. It is equal to the
logical NOT operator.
Subnet Mask – Specify the Subnet Mask for the IP Address column for
this filter rule to apply to.
Operator – The operator column specifies the port number settings. If the
Start Port is empty, the Start Port and the End Port column will be
ignored. The filter rule will filter out any port number.
= : If the End Port is empty, the filter rule will set the port
number to be the value of the Start Port. Otherwise, the
port number ranges between the Start Port and the End
Port (including the Start Port and the End Port).
!= : If the End Port is empty, the port number is not equal
to the value of the Start Port. Otherwise, this port number
is not between the Start Port and the End Port (including
the Start Port and End Port).
> : Specify the port number is larger than the Start Port
(includes the Start Port).
< : Specify the port number is less than the Start Port
(includes the Start Port).
Keep State – also may be quoted as SPI (stateful packets inspection), is a
mechanism used to drop the invalid incoming packets. When checked,
protocol information about the TCP/UDP/ICMP communication sessions
will be kept by the IP Filter/Firewall (the Firewall Protocol option
requires that TCP or UDP or TCP/UDP or ICMP be selected for this to
operate correctly).
Source Route – When checked, the IP options of source routing will be
applied for the rule. In general please do not enable this option for higher
security policy.
Fragments – Specify a fragmented packets action.
Don't Care - Specify no fragment options in the filter rule.
Unfragmented - Apply the rule to unfragmented packets.
Fragmented - Apply the rule to fragmented packets.
Too Short - Apply the rule only to packets that are too short to
contain a complete header.
Some fragmented packets are malicious so it may be necessary to
hinder the fragmented packets for higher security policies.
Restricting Unauthorized Internet Services
This section will show a simple example to restrict access of WWW from certain
locations. In this example, we assume the IP address of the access-restricted user is
192.168.1.10. The filter rule is created in the Data Filter set and is shown as below.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DI-304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DI-304 in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DI-304

D-Link DI-304 Installation Guide - English - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info