728116
52
Zoom out
Zoom in
Previous page
1/96
Next page
DI-304/DI-304M ISDN Remote Router
44
Common Settings
Profile Name – Specify a name for the remote network.
Enable this profile – Check here to activate this profile.
Call Direction – Specify the allowed call direction for this profile.
Both - allow access of both outgoing and incoming calls.
Dial-Out - allow access of outgoing calls only.
Dial-In - allow access of incoming calls only.
Idle Timeout – Default setting is 300 seconds. When a connection of a
profile has been idled longer than the time limit, the router will drop the
connection.
Dial-Out Settings
Username – Specify a username for authentication by the remote router.
Password – Specify a password for authentication by the remote router.
Dial Number – Specify the destination ISDN number for dialup.
Scheduler (1-15) Enter up to 4 index numbers for calls that have been
previously configured on the Call Schedule Setup windows (under
Advanced Setup).
Link Type – Indicate the dial-out link type.
Disable: Deactivate the dial-out action.
64kbps: Specify the outgoing connection speed is restricted to
64kbps (one B-channel).
128k bps: Specify the outgoing connection speed is 128kbps (two
B-channels).
BOD: Specify the link type to be dynamic bandwidth control
(Bandwidth-on-Demand).
PPP Authentication – Specify the authentication method. Normally set
to PAP/CHAP for the widest compatibility.
VJ Compression – VJ Compression means TCP/IP protocol header
compression. Normally set to "On" to improve band-width utilization.
Callback Function (CBCP) – The callback function is implemented by
the CBCP protocol that is one of the PPP protocol suite.
Require Remote to Callback - Inactive by default. When active,
the router exchanges connection information with the remote router
and requires the remote router to call back to make a connection.
Provide ISDN Number to Remote - In some cases, the remote
router requires the ISDN number for calling back. Check here to
allow the local router to send the ISDN number to the remote router.
The remote router owner will be charged the connection fee by the
telecom.
Dial-In Settings
Username – Specify an username to authenticate the dial-in router.
Password – Specify a password to authenticate the dial-in router.
Enable CLID Authentication – Limit the dial-in router to be called from
a specific ISDN number.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DI-304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DI-304 in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DI-304

D-Link DI-304 Installation Guide - English - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info