728116
18
Zoom out
Zoom in
Previous page
1/96
Next page
DI-304ISDN Remote Router
10
The DI-304 has a power jack, an uplink port, four RJ-45 ports, an ISDN port on the
rear panel, and a factory reset button. Please note that only the D-Link supplied
power adapter should be connected to the power jack.
POWER — This socket is an 17 volt, 1000mA power input jack. If the
power adapter included with the router has been lost or misplaced,
please ensure that the replacement adapter meets both the voltage and
amperage requirements.
ETHERNET – The Ethernet ports function as a normal, dual speed
NWay Ethernet switch.
Uplink – This port is used to connect the router to another
switch or hub using a straight-through twisted-pair cable.
When the Uplink port is used, Port 1x is unavailable.
Ports 1x to 4x – These four ports can be used to connect
end-stations to the router using straight-through cables.
ISDN – This socket is used to connect the ISDN line to either an NT-1
or directly to the ISDN wall jack, depending on the type of service
delivered by your phone company.
Factory Reset :
Press and hold the button. Then switch on your DI-304.
The Status LED flashes.
To reset the DI-304 to the factory settings: Press and hold the button for
5 seconds when the unit is switched on. The Status LED will flash more
quickly – at this moment, release the button and the router is reset to its
factory settings.
Hardware Installation
Connecting the Power Adapter
1. Connect the power adapter to the electrical outlet in the wall and to the power
jack on the rear panel of the router.
2. The Act LED should be blinking once every 2 seconds.
Connecting to the Ethernet
A. Connecting to PCs:
1. Attach the Ethernet cable to any P1 ~ P4 port.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DI-304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DI-304 in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DI-304

D-Link DI-304 Installation Guide - English - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info