728116
2
Zoom out
Zoom in
Previous page
1/5
Next page
Introduction
This Quick Installation Guide gives step-by-step instruc-
tions for setting up the D-Link DI-304 ISDN routers. The
model you have purchased may appear slightly different
from those shown in the illustrations. Examples in this
manual are based on ISDN routers. For more detailed in-
formation about the ISDN router, its components, making
network connections and technical specifications, please
refer to the Users Guide included with your router.
Unpacking
Open the shipping cartons of your Internet server and care-
fully unpacks the contents. The carton should contain the
following items:
One ISDN Router device
One AC power adapter, suitable for your areas
electrical power connections
One unshielded twisted-pair (UTP) cable.
One unshielded twisted-pair (ISDN) cable.
Rubber Feet
Users Guide
CD-ROM
Inspect the device and all accompanying items. If any item
is damaged or missing, report the problem immediately to
your dealer.
Ordering Your ISDN Line
If you do not have an ISDN line installed already, we sug-
gest that you order it from your telephone company as soon
as possible to avoid the long waiting period common when
ordering a new line. Use the information in this section to
place the order. If you have already installed your ISDN
line, you can check the following section to make sure that
you can use all the features of your ISDN router.
1. Contact your local telephone companys ISDN Order-
ing Center.
2. Make sure DSS1 switches are available since these are
the only switch types currently supported by the ISDN
router.
3. When the telephone company installs your ISDN line,
be sure to obtain the following information:
ISDN switch type.
ISDN telephone number(s).
The ISDN router Front Panel
Names and descriptions of your routers front panel LEDs
are given below:
DI-304
POWER Comes on as soon as you connect the router to
the power adapter and plug the power adapter into a suitable
AC outlet.
STATUS Should be blinking if the router is functioning
properly.
ISDN LINK Indicates that the router has an ISDN line
connected to the ISDN interface and it has been successfully
initialized.
Note: On some NT1 boxes, the LINK indicator will go off
when the ISDN line has been idle for a while. When the
router is dialing or answering a call, it should be on again.
ISDN B1 and B2 On if there is an active ISDN session
on that channel or if that channel is making or receiving a
call.
LINK/ACT 1 through 4. These indicators light up when a
port is connected to a powered-on Ethernet/Fast Ethernet
station. The LEDs blink when information is transmitted or
received on a port.
100/10M 1 through 4 These indicators light up when a
port is operating at 100Mbps. Otherwise, if this indicator is
dark and the corresponding LINK indicator is lit, then the
port is operating at 10Mbps.
The ISDN router Rear Panel
DI-304
POWER This socket is an 18 volt, 750mA power input
jack. If the power adapter included with the router has been
lost or misplaced, please ensure that the replacement adapter
meets both the voltage and amperage requirements.
ETHERNET The Ethernet ports function as a normal,
dual speed NWay Ethernet switch.
Uplink This port is used to connect the router to another
switch or hub using a straight-through twisted-pair cable.
When the Uplink port is used, Port 1x is unavailable.
2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DI-304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DI-304 in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DI-304

D-Link DI-304 User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info