728136

D-Link DBA-1210P - Nuclias Cloud Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
3
ENGLISH
Powering the Access Point
The DBA-1210P can be powered using one of the
following two methods:
Using Power over Ethernet (PoE)
1. Use a standard Ethernet cable to connect the LAN
port on the DBA-1210P to a PoE power source
device such as a PoE switch or PoE injector.
(Optional) Using the power adapter
1. Connect the power connector of the adapter to
the power input on the DBA-1210P and plug the
adapter into a nearby power outlet.
Conguring the Access Point
Using D-Link Nuclias
Note: To use D-Link Nuclias, the DBA-1210P must be
connected to the Internet.
The DBA-1210P is designed to be managed through
the D-Link Nuclias cloud. Refer to the D-Link Nuclias
User Manual for detailed conguration instructions.
D-Link DBA-1510P Quick Install Guide
6
ENGLISH
Switch or RouterSwitch or Router
Switch or Router
Management
Management
DBA-1210P
DBA-1510P
DBA-1510P
DBA-1510P
Management
Management
D-Link Nuclias
Figure 3: Connecting through D-Link Nuclias
1. On an Internet-connected PC, open a web
browser and go to www.nuclias.com.
2. Enter your D-Link Nuclias user name and
password.
If a device’s login credentials are modied using
Nuclias Cloud, the local username and password
will also reect the changes made. To learn more
about conguring your password, please refer to
the Nuclias Cloud manual.
Manual Conguration
Note: D-Link recommends manually conguring the
device before mounting it.
If you are unable to connect to the D-Link Nuclias
cloud, you may need to manually configure the
DBA-1210P using its web user interface (UI).
Refer to the DBA-1210P User Manual for detailed
conguration instructions.
Use one of the following methods to access the web
user interface:
Connecting through Ethernet
Note: The management PC must be in the same
subnet as the DBA-1210P.
1. Use an Ethernet cable to connect the DBA-1210P
to the management PC or to the switch or router
the management PC is connected to.
Open a web browser and type in the default
host name of the DBA-1210P and press Enter.
The default host name is DBA-1210P-XXXX
where XXXX represents the last 4 characters
of the MAC address listed on the device label
located on the bottom of the device.
2. When prompted, enter the default login
credentials:
User name: admin
Password: admin
Connecting wirelessly
1. Connect the management PC to the default SSID
of the DBA-1210P. The SSID will be in the format
DBA-1210P-XXX where XXXX represents the
last 4 characters of the MAC address listed on the
device label located on the bottom of the device.
2. Open a web browser and type in the default
host name of the DBA-1210P and press Enter.
The default host name is DBA-1210P-XXXX
where XXXX represents the last 4 characters
of the MAC address listed on the device label
located on the bottom of the device.
3. When prompted, enter the default login
credentials:
User name: admin
Password: admin
Attaching the Rubber Pads
The included rubber pads can be placed on the
bottom of the device to prevent the device from
damaging the surface it is placed on.
1. Remove the rubber pads from the adhesive strip.
2. Stick one pad on each foot on the bottom panel
of the access point.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DBA-1210P - Nuclias Cloud at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DBA-1210P - Nuclias Cloud in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of D-Link DBA-1210P - Nuclias Cloud

D-Link DBA-1210P - Nuclias Cloud Quick start guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info