498611
68
Zoom out
Zoom in
Previous page
1/98
Next page
68D-Link DAP-1525 User Manual
Section 4 - Security
Congure WEP (Bridge Mode)
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a
web browser and entering the IP address of the access
point(192.168.0.50). Click Setup and then Wireless Settings
on the left side.
2. Select EnableWEPWirelessSecurity(basic) in the Security
Mode drop-down menu in the Wireless Security Mode section.
3. Next to WEP Encryption in the WEP section, select the level
of encryption (64-bit or 128-bit). Hex - (recommended) Letters
A-F and numbers 0-9 are valid.
4. Next to Default WEP Key and the rst selection in the drop-
down menu, WEP Key 1. Enter a WEP key that you create in
the WEP Key value and Verify WEP Key value elds. Make sure you enter this key exactly on all your wireless devices. You
may enter up to 4 dierent keys using the Default WEP Key drop-down menu.
5. Select Open or Shared Key from the Authentication drop-down menu.
6. Click Save Settings to save your settings. If you are conguring the access point with a wireless adapter, you will lose
connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the access point.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for D-Link DAP-1525 Amplify wi-fi booster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of D-Link DAP-1525 Amplify wi-fi booster in the language / languages: English as an attachment in your email.

The manual is 8,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info