Manual Cycle Ops Cervo 2.4 (page 27 of 32) (English)

541882

Zoom out

Zoom in

1/32

watts

data

hub

45847

hub

LEArn

5) Press [SELECT] to toggle through auto start options.

mi, and data = allows trip time to count when wheel speed is regis-

tering. Trip time stops 3sec. after if speed is not registered.

( ), and data = allows trip time to count as long as a heart rate sig-

nal is

registered. This function is useful in the transition from

cycling to running and vice versa.

Press [MODE] to save.

COMPUTER SETUP 5

This setup allows the CPU to learn a new device or sensor such as the hub, heart rate strap and

optional cadence sensor. NOTE: This process only needs to be used if a new sensor or hub is

being used in conjunction with your CPU or vice versa and if batteries are changed in the hub or

chest strap. There are 2 Learn sequences, 1 and 2. Learn 1 is used when you have switched sen-

sors or the CPU and there are no other like bikes with PowerTap SL2.4 within a 30’ radius. Learn 2

is used if there are other devices in the area but requires you to remove and reinsert the battery

before activating the Learn 2 sequence.

1) To manually change the hub I.D. Push [Select] to toggle through the

Hub I.D. Press [Mode] to save.

2) In most ca

ses the Hub I.D. will not be known so you can "learn" the I.D. by

pressing [Mode] to advance through the Hub I.D. settings to Learn 1. NOTE:

Learn 1 will search for any active hub so be sure that there are no other

active hubs in the area. If there are, proceed to Lear

n 2.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cycle Ops Cervo 2.4 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cycle Ops Cervo 2.4 Manual

Product: