498403
13
Zoom out
Zoom in
Previous page
1/70
Next page
INSTALLATION OF THE CAR SEAT WITH CONNECTORS
The saftey of your child will be increased using the ISOFIX-CONNECT
system linking the child seat tightly with the vehicle. Your child will still be
buckled up using the car‘s 3-point-belt.
Connect the two enclosed X-fix installation aids (their longer parts pointing
upwards) with the two ISOFIX anchorage points (i).
Note! The car‘s ISOFIX anchorage points (i) are two metal rings per seat, located
between the backrest and the seat cushion of your vehicle seat. If in doubt
please refer to your vehicle owner’s manual.
– For adjustment move the X-fix lever (v), located on the bottom of the seat.
– Pull the connectors (w) as far out as they will go.
Rotate the X-fix connectors by 180° until they point into the direction of the
installation aids.
Note! Make sure that the green safety indication (x) of the connectors is not
visible. If necessary, release them by pushing and simultaneously pulling back
the red release button (y). Repeat this procedure with the other connector.
Push both of the X-fix connectors (w) into the installation aids until you hear
them clicking into the ISOFIX anchorage points (i).
– Make sure that the child seat is connected safely by trying to pull it out.
– The green safety indication (x) must be clearly visible on both sides of the red
release buttons (y).
With the X-fix button located on the bottom of the child seat you can now
adjust the position of the seat.
Note! For additional information please refer to the section “Placing the Seat
in the Car”.
– You can now buckle up the child. Please refer to “Buckling Up the Child”.
INSTALLATION DU SIÈGE AUTO AVEC LES CONNECTEURS
La sécurité de votre enfant sera augmentée avec les connecteurs X-fix
qui permettent au siège d‘être maintenu fermement dans le véhicule.
Votre enfant reste attaché par la ceinture de sécurité 3 points.
Connecter les 2 installations X-fix fournies (les parties les plus longues, pointant
vers le haut) avec les 2 points d‘ancrages ISOFIX (i).
Note! Les points d‘ancrages ISOFIX (i) sont deux crochets métalliques situés
entre le dossier et l‘assise du siège de votre véhicule. En cas de doute, se référer
au manuel d‘instructions de votre véhicule.
– Pour ajuster, appuyer sur le bouton X-fix (v), situé au bas du siège auto.
– Tirer les connecteurs (w) le plus loin possible.
Tourner le bouton connecteur X-fix à 180° de facon à ce qu‘ils pointent en
direction des aides d‘installation.
Note! Assurez-vous que l‘indication de sécurité vert (x) des connecteurs n‘est
pas visible. Si nécessaire, les libérer en poussant et en tirant simultanément retour
sur la touche rouge (y). Répétez cette procédure avec l‘autre connecteur.
– Pousser les deux connecteurs X-fix dans lespoints d‘ancrages (i).
– S‘assurer que le siège est connecté fermement en essayant de le tirer ver soi.
– L‘indication de sécurité vert (x) doit être clairement visible des deux côtés de
les boutons de déverrouillage rouge (y).
– Grâce à la poignée orange, vous pouvez ajuster la profondeur du siège.
Note! Pour plus d‘informations, merci de se référer à la section „Placer le siège
dans la voiture“.
Vous pouvez maintenant attacher l‘enfant. Merci de vous référer à
„Comment attacher l‘enfant“
12
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex SOLUTION X2-FIX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex SOLUTION X2-FIX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info