689497
16
Zoom out
Zoom in
Previous page
1/142
Next page
15
ENIT
DE
REMOVAL OF THE CHILD SEAT
Perform the installation steps in the reverse order.
NOTE! By folding in the ISOFIX Connect locking arms (7), you are not just protecting the
vehicle seat but also the locking arms of the ISOFIX Connect system from dirt and damage.
Unlock the ISOFIX Connect locking arms (7) on both sides by pushing the
grey release buttons (8) and pulling them back simultaneously.
Pull the seat out of the ISOFIX guides (3).
Rotate the ISOFIX Connect locking arms (7) 180°.
Operate the adjustment lever (2) on the frame (6) of the CYBEX PALLAS
S-FIX and push the locking arms in as far as they will go.
WARNING! Using the L.S.P. device for carrying or climbing into the child seat
is prohibited.
!
ADJUSTING THE SIDE PROTECTORS
The child seat is equipped with the “Linear Side-impact Protection“ system (L.S.P.). This
system increases the safety of your child in case of side impact. Activate the L.S.P. to
the nearest door side for having the best possible safety. To release the L.S.P. press the
marked area (10) on the L.S.P.
NOTE! When using the child seat on a middle position in the vehicle, it‘s prohibited to fold
out the L.S.P. device.
NOTE! Make sure, that the L.S.P. is fixed with an audible “CLICK”. In case the L.S.P.
touches the door, it ought to be stored away properly.
It‘s allowed to be used in this position. In order to push back the L.S.P. into the seat, pull
out the L.S.P. slightly and fold it, until it locks with an audible “CLICK”.
DISINSTALLARE IL SEGGIOLINO
Seguire il procedimento per l’installazione nell’ordine inverso.
NOTA BENE! Ripiegando i connettori ISOFIX (7), proteggerete da possibili danni non
solo il sedile dell’auto, ma anche da danneggiamento e sporcizia i connettori ISOFIX
stessi.
Sloccare i bracci di bloccaggio ISOFIX (7) su entrambi i lati premendo e
tirando simultaneamente i pulsanti di rilancio rossi (8)
Estrarre il seggiolino dagli ausili di inserimento (3).
Ruotare di 180° i bracci di bloccaggio(7).
Azionare la leva di regolazione (2) sul telaio (6) del Kindersitz e
spingere all’interno i bracci di bloccaggio fino al limite.
ATTENZIONE! E’ assolutamente vietato utilizzare il dispositivo L.S.P. per trasportare
il seggiolino o per inserirlo nell’auto.
!
REGOLARE LE PROTEZIONI LATERALI
Il seggiolino auto è dotato del sistema di “Protezione Lineare da Impatto Laterale” L.S.P.).
Tale sistema aumenta la sicurezza del tuo bambino in caso di incidente a collisione laterale.
Estrarre la protezione L.S.P. sul lato più vicino alla portiera per garantire la massima
sicurezza possibile. Per rilasciare il sistema L.S.P premere il pulsante L.S.P (10)
NOTA BENE! Quando il seggiolino è installato nel sedile centrale del veicolo gli L.S.P.
NON devono essere estratti.
NOTA BENE! Assicuratevi che il sistema L.S.P sia in posizione corretta a seguito di
un chiaro scatto. Nel caso l’L.S.P. arrivi a toccare la portiera, dovrebbe essere riposto
correttamente.
E’ ammesso l’uso in questa posizione. Premere nuovamente il pulsante L.S.P e spingere il
L.S.P in posizione iniziale per farlo rietrnare nell’alloggiamento.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex SOLUTION S-FIX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex SOLUTION S-FIX in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 25,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info