768285
8
Zoom out
Zoom in
Previous page
1/92
Next page
6
EN
PRODUCT PARTS
(a) User Guide Storage
Compartment
(b) Backrest
(c) Adjustable Headrest
(d) Headrest Height Adjuster
(e) Booster
(f) Lap Belt Guide
(g) Shoulder Belt Guide
(h) Side Impact Protection
(i) ISOFIX Connect Locking Arms
(j) ISOFIX Connect Adjustment
Handle
(k) ISOFIX Connect Release Button
(l) ISOFIX Connect Safety
Indicator
(m) ISOFIX Anchorage Points
INITIAL ASSEMBLY
Connect the backrest (b) to the booster (e) by hooking the guide lug on the
axis of the booster. The backrest (b) is then folded forward.
THE CORRECT POSITION IN THE VEHICLE
The child seat with retracted ISOFIX Connect locking arms (i) can be used on
all vehicle seats with automatic three-point safety belts approved in the vehicle
manual for “universal” use.

to the car through ISOFIX Connect locking arms (i). For this reason, ISOFIX
Connect can only be used in certain vehicles. Refer to the enclosed vehicle
type list for approved vehicles. You can obtain the most up-to-date version from
www.cybex-online.com.
In exceptional cases, the child car seat may also be used on the front
passenger seat. Always comply with the recommendations of the vehicle
manufacturer.
INSTALLING THE CHILD SEAT IN THE VEHICLE
1. Always ensure that…
the backrests in the vehicle are locked in their upright position.
when installing the child seat on the front passenger seat, adjust the vehicle
󰀨
2. Use the ISOFIX Connect adjustment handle (j) under the booster (e) and
pull the two ISOFIX Connect locking arms (i) to their furthest extent.
3. Now twist the ISOFIX Connect locking arms (i) 180° so that they are facing
the direction of the ISOFIX anchorage points (m).
4. Place the child seat on the appropriate seat in the car.
5. Push the two locking arms (i) into the ISOFIX anchorage points (m) until
these lock into place with an audible "CLICK".
6. Use the ISOFIX adjustment handle (j) and push the car seat against the
vehicle seat.
7. Ensure that the entire surface of the backrest (b) of the child seat is placed
against the backrest of the vehicle seat.
💡If the headrest of the vehicle is in the way, pull it upwards to its furthest
extent or remove it completely (except in rear-facing vehicle seats).
8. Ensure the seat is secure by trying to pull it out of the ISOFIX anchorage
points (m). The green safety indicators (l) must be clearly visible on both
sides of the seat.
9. In case the seat is used without ISOFIX connect, it can be stored away on
the bottom of the seat.
💡By using ISOFIX Connect, a connection to the vehicle is created which
increases your child’s safety. Your child still needs to be secured with the
three-point belt of the vehicle.
REMOVING THE CHILD SEAT FROM THE VEHICLE
Perform the installation steps in the reverse order.
1. Unlock the ISOFIX Connect locking arms (i) on both sides by pushing the
release buttons (k) and pulling them back simultaneously.
2. Pull the seat away from the ISOFIX anchorage points (m).
3. Remove the child seat and store the ISOFIX Connect in reverse order to
installation.
ADJUSTING THE HEADREST
The headrest (c) can be adjusted by using the headrest height adjuster (d) at
the back of the headrest (c). Adjust the headrest (c) so that max. 2 cm (approx.
(c).
💡The height of the headrest can still be adjusted while the seat is installed
in the car.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex SOLUTION B2-FIX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex SOLUTION B2-FIX in the language / languages: All languages as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info