768282
57
Zoom out
Zoom in
Previous page
1/252
Next page
57
DEENIT
PRODUCT CARE CURA DEL PRODOTTO
All major components of the car seat must be regularly checked for
damage. The mechanical parts must work without problems.
Make sure that the car seat is not jammed between hard parts such
as the car door, seat rails etc., which can damage it.
Avoid getting any dirt or sand in between the upper seat shell and
the base. This can have a negative impact on the performance of the
rotation and recline function. Should this happen the dirt should be
removed before rotating and reclining the seat any further to avoid
any permanent damage of the seat. To do that remove the seat from
the base.
If e.g. the car seat is dropped, it must be tested by the manufacturer
before being used again.
Tutte le parti principali del seggiolino devono essere sottoposte ad
un regolare controllo per verificare eventuali danni. I componenti
meccanici devono funzionare correttamente.
E’ essenziale che il seggiolino non venga mai schiaccia-
to tra oggetti rigidi, come le portiere dell’auto, i binari del sedile, ecc.
perchè ne sarebbe danneggiato.
Evitare assolutamente che sporco o sabbia penetrino tra la
scocca della seduta e la base. Ciò potrebbe compromettere le
funzioni di rotazione e di reclinazione. Nel caso dovesse accadere,
raccomandiamo di non forzare la rotazione o la reclinazione, ma di
rimuovere prima lo sporco, per evitare danni permanenti al seggiolino.
A questo punto è possibile sollevare il seggiolino dalla base.
Nel caso il seggiolino dovesse cadere, dovrà essere controllato dal
produttore prima di poter essere riutilizzato.
To guarantee that your car seat provides the maximum protection, it is
essential to comply with the following points:
Perchè il seggiolino continui ad offrire la massima protezione è necessario
tenere presente quanto segue:
Is the base stored away it is crucial to fold the load leg in a way so the
characteristic noise will stop. Therefore a small slot at the bottom of the
base is provided. This will protect the battery.
Se la base è riposta, è fondamentale piegare la gamba del carico in
modo che il rumore caratteristico si fermi. Pertanto viene fornita una
piccola fessura nella parte inferiore della base. Questo protegge la
batteria.
Is the base not in use for a long time it is important to remove the
battery so it can‘t harm the base through escaping liquids (see chapter:
„HOW TO CHANGE BATTERY“).
Se la base non viene utilizzata per un lungo periodo, è importante
rimuovere la batteria in modo che non possa danneggiare la base
con liquidi in uscita (vedere il capitolo “COME SOSTITUIRE LE
BATTERIE“).
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cybex SIRONA Z i-Size R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cybex SIRONA Z i-Size R in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 10,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info