498353
37
Zoom out
Zoom in
Previous page
1/82
Next page
Chapter 4: Adjustments
31
1. Click to open the adjustment brush controls.
2. Click and drag on the photo to apply a brush stroke. CyberLink PhotoDirector
displays a mask color on the area you apply.
Note: the mask disappears as soon as you start adjusting the brush options. See "Using
Masks for Multiple Brush Adjustments" on page 32 for more information.
3. Set the adjustment brush options as follows:
- Brush/Eraser: select the Brush to apply the set adjustments. Use the
Eraser if you make some errors using the brush and want to remove areas
of the applied adjustments.
- Size: use the slider to set the size of the brushed or erased area. You can
also use the mouse scroll wheel to adjust the diameter of the brush.
- Feather: use the slider to set the transition level between the area being
brushed and the pixels around the area. The area between the inner and
outer circle is the size of the gradient that CyberLink PhotoDirector uses to
create a smooth transition between the areas.
- Flow: use the slider to set the amount of adjustment applied with a brush
stroke.
- Fit to edges: select this option to limit applied adjustments to areas of the
photo that have a similar properties. CyberLink PhotoDirector auto applies
them for you based on your brush strokes.
4. Set the type of adjustment you want to make using the available sliders:
- Exposure: use to adjust areas of the photo that are over or underexposed.
A negative value darkens overexposed areas, while a positive value lightens
underexposed areas.
- Brightness: use to adjust the brightness in parts of the photo.
- Contrast: use to adjust contrast, or the difference between light and dark
areas of the photo.
- Saturation: use to adjust the intensity of a color in certain areas of the
photo.
- Clarity: use to adjust the clarity of details in the photo.
- Sharpness: use to enhance definition of objects and content in the photo.
- Blue/Yellow: use to adjust the color level of blues and yellows in the photo.
- Green Magenta: use to adjust the photo’s green and magenta levels.
5. Click and drag on the other areas of the photo where the adjustments should
be applied. Use the sliders to further refine the adjustments as required.
6. Click Done to finish the adjustments and close the panel.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cyberlink PhotoDirector 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cyberlink PhotoDirector 2011 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cyberlink PhotoDirector 2011

Cyberlink PhotoDirector 2011 User Manual - German - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info