Manual Cyberlink LabelPrint 2 (page 14 of 38) (English)

498368

Zoom out

Zoom in

1/38

CyberLink LabelPrint

LightScribe Media

Identification

The LightScribe system requires the use of LightScribe-enabled discs.

LightScribe uses control features in the center/hub of the disc to

identify media as LightScribe media. If your system does not seem to

recognize the media as LightScribe media, take the following steps.

1. Make sure the disc is a LightScribe-enabled disc. LightScribe

media will have the LightScribe logo in the inner hub area. There

will also be visible control features inside, and adjacent to, the

coated label area.

2. Make sure the disc is properly oriented in the drive. The label

side, which contains a special coating, should be face down in

the drive.

3. Clean the center area (hub) of the disc. Use a lint-free cloth to

wipe the hub area and remove any dirt or smudges that may be

covering the control features.

4. If these steps do not fix the problem, try another LightScribe

disc.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cyberlink LabelPrint 2 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cyberlink LabelPrint 2

Cyberlink LabelPrint 2 User Manual - German - 46 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cyberlink LabelPrint 2 Manual

Product: