586908

Cyberlink AudioDirector 4 Manual

60
Zoom out
Zoom in
Previous page
1/113
Next page
54
CyberLink AudioDirector
just one channel. See Selecting Channels for Editing for more information on
selecting channels.
4. Click Flanger under the Apply Effect section.
5. Select a flanger preset from the Presets drop-down. Select the preset that best
suits the sound you want to achieve.
6. If required, click to modify the advanced settings as follows:
Initial delay time: use this slider to set how far behind, in milliseconds, the
audio with the flange effect applied will start behind the original audio signal.
Delay depth: use this slider to control the depth of the pitch that is applied to
the effect.
Phase diff: use this slider to set the phase difference between the two
channels (0~360 deg).
Feedback: use the slider to set the percentage of the delayed output that is
fed back in to the original audio. Adjusting this option can greatly intensify
the effect.
Modulation rate: use the slider to control how quickly (measured in hertz, or
cycles per second) the filters sweep to and from the source frequency of the
audio.
Shape: select the shape of the transition from the initial delay time to final
delay, and then back again. Sine makes the transition follow a sine wave,
while Triangle makes it follow a triangle wave.
Dry-Wet mix: use the slider to set the ratio between the dry (original audio)
and wet (delayed flanged audio signal) audio. Dragging the slider to the left
provides more of the original audio in the mix, while to the right adds more
of the modified audio.
7. If required, you can preview how the applied effect will sound by
selecting Adjusted result and then clicking the play button on the
playback controls. Select Original audio if you want to play the
original audio.
8. Click Apply to add the flange effect to the audio.
Note: if required, click on the Effect tab to see the applied effect in the edit panel.
See Effect Tab for more information.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cyberlink AudioDirector 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cyberlink AudioDirector 4 in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info