586908

Cyberlink AudioDirector 4 Manual

57
Zoom out
Zoom in
Previous page
1/113
Next page
51
Editing Audio
5. Click Apply to remove the vocals from the audio.
Note: if required, click on the Effect tab to see the applied effect in the edit panel.
See Effect Tab for more information.
Applying a Noise Gate
Apply the noise gate if you want to control the volume of a media file's audio
signal by blocking audio that falls below a specified threshold or decibel level. The
resulting audio can then be processed differently from the original audio.
To apply a noise gate to audio, do this:
1. Select the media file in the library that you want to apply the noise gate to.
2. If required, use range selection to select the portion of an audio file you want
to apply the effect to. See Range Selection for more information on selecting
a range of an audio file. If you don't select a range, the effect is applied to the
entire audio clip.
Note: the entire audio file's waveform is selected by default when this feature is
opened. If you want to apply this feature to the entire audio file, you do not need to
use range selection when the entire waveform is selected.
3. Decide whether you want to apply the effect on all the available channels, or
just one channel. See Selecting Channels for Editing for more information on
selecting channels.
4. Click Noise Gate under the Apply Effect section.
5. Select a noise gate preset from the Presets drop-down. Select the preset that
best suits the sound you want to achieve.
6. If required, click to modify the advanced settings as follows:
Threshold: use this slider to determine the minimum input audio level
required to make the noise gate open and pass the audio signal through.
Attack time: use this slider to set the duration that the noise gate
takes to change from closed to open. Attack time is similar to a fade-
in.
Release time: use this slider to set the duration it takes for the noise
gate to change from fully open to closed. Release time is similar to a
fade-out.
Hold time: use this slider to set the duration the noise gate stays open after
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cyberlink AudioDirector 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cyberlink AudioDirector 4 in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info