586908

Cyberlink AudioDirector 4 Manual

43
Zoom out
Zoom in
Previous page
1/113
Next page
37
Editing Audio
5. Select the Mode of trimming you want to perform as follows:
Remove selected part: select if you want to trim out the part you selected in
the previous step.
Keep selected part: select if you want to keep the part you selected in the
previous step, removing the portions on either side.
Note: if required, click to use the Mark in and Mark out previews to listen to
the audio a few seconds before and after the trim points to ensure you are trimming
the audio you want.
6. Click Apply to trim the audio.
Adjusting Length
Use the Adjust Length feature to change the length of audio by speeding it up, or
by slowing it down.
To adjust the length of audio, do this:
1. Select the media file in the library that you want to adjust.
2. Click Adjust Length under the Adjust Audio section.
3. Decide whether you want to perform the adjustment on all the available
channels, or just one channel. See Selecting Channels for Editing for more
information on selecting channels.
4. If required, use range selection to select the portion of an audio file you want
to adjust the length of. If you don't select a range, the adjustment is applied
to the entire audio file. See Range Selection for more information on selecting
a range of an audio file.
Note: the entire audio file's waveform is selected by default when this feature is
opened. If you want to apply this feature to the entire audio file, you do not need to
use range selection when the entire waveform is selected.
5. To adjust the length of the audio, do one of the following:
Manually enter the New audio length in the field provided. Use this feature if
you want the audio to be an exact specified length.
Use the Stretch ratio slider to set the increase/decrease amount you want to
use.
Note: if required, you can use both the New audio length and Stretch ratio
features together to adjust the length of the audio.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cyberlink AudioDirector 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cyberlink AudioDirector 4 in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info