498387

Cyberhome CH-DVR 1500 Manual

39
Zoom out
Zoom in
Previous page
1/41
Next page
TROUBLESHOOTING
3939
Common Problems & Solutions
The DVD Recorder Does Not Power On
The AC Power cord may be loose or not plugged in. Make
sure the power cord is secure in the AC socket and the
connector on the back of the player.
The unit may be in Standby Mode. Turn the player on with
the remote POWER button, or turn the unit off with the
back power switch, wait for a few seconds, then turn the
unit back on.
There must be a pause between powering the unit down and
back on of a few seconds.
A Specific Disc Does Not Play
The disc may be dirty. Try cleaning the disc.
Make sure the disc is not in upside-down
The REGION CODE of the disc may not match that of the
player. In this case, the disc cannot be used.
The Remote Control Does Not Function
Make sure you’re aiming the remote directly at the player’s
remote sensor, located in the front display.
Make sure there are no obstacles between the remote and
the player.
The batteries may be drained. Try changing the batteries in
the remote.
You could be using the remote too far away. Try within 4
meters of the player.
There is No Picture on the TV Screen
Make sure the connections from the player to the TV are
secure.
Verify that the TV’s channel is set to match the video input
you’re using. Refer to the TV’s documentation.
On most TVs the “Aux In”, “Video In” or “A/V In” channel
should match the video input connector.
If you’re using the S-Video connector, the TV may have a
separate input channel for this type.
The Picture Appears Stretched or Squeezed
The Video Aspect Ratio may be set wrong for your
Television type.
Enter the SETUP MENU and select the VIDEO OUTPUT
MENU. Try changing the ASPECT setting to 4:3 PanScan
(Pan & Scan) if you are using a standard TV, or 16:9 Wide
if your TV is a Wide-Screen type.
Recording Will Not Start
The Video Input Source may be protected with
MacroVision Copy Protection.
The disc may already contain recordings of a different TV
System type - PAL or NTSC. If the disc already contains a
PAL recording, you cannot record from an NTSC source,
and vice versa.
The maximum number of titles - 48 - may have been
reached.
If the disc is a DVD+R, it may already be FINALIZED.
The Disc Cannot be Erased
The disc is not a DVD+RW disc.
The disc may be dirty. Try cleaning the disc.
Recordings Do Not Play on Other DVD Players
If the disc is a DVD+R, make sure it has been
FINALIZED.
The DVD Player may not support DVD+R/RW discs.
Timer Recording Does Not Start.
The Time/Date is invalid or conflicts with another schedule.
The Time/Date settings of the Recorder are incorrect. Set
the Time/Date in SETUP.
The specified Video Input Source is unavailable.
The disc is out of space.
Hidden Chapters Cannot be Edited.
You must select PLAY FULL TITLE from the EDIT
MENU in the Title Screen to have access to Hidden
Chapters.
Playback
Recording
The Disc Doesn’t Eject
If the player is in Standby Mode with the glowing LED to
the left of the disc tray, the disc will not eject. Turn the
player on with the Remote Control and then eject the disc.
Distorted Picture when Connected to a VCR
This DVD Player is built with Macrovision copy-
protection. This will distort the signal when used with
VCRs. Connect the player directly to the TV.
Downloaded from www.Manualslib.com manuals search engine
… 39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cyberhome CH-DVR 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cyberhome CH-DVR 1500 in the language / languages: English as an attachment in your email.

The manual is 6,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info