USER PREFERENCES
44
Brightness
To adjust the intensity of light emitted. The setting range for the picture bright-
ness is from -20 to +20. Set the brightness with help of the buttons “B” and “A”
and press then “ENTER” to return.
Contrast
Adjustment of the picture contrast. The contrast is decisive for the overall dis-
play. Light spots should stand out clearly from dark spots without loosing the
strength of the picture. The setting range for the picture brightness is from -16
to +16. Set the brightness with help of the buttons “B” und “A” and press then
“ENTER” to return.
Changing the audio settings
Highlight the menu point you would like to set in the menu “Audio”. Press the
button “ENTER” to enter a menu. Use the button “C” or “D” to select the
required sound setting and press “ENTER” to confirm your selection. You can
leave the menu at any time by pressing the button “B” on your remote control.
Downmix
Since most DVD discs feature Dolby Digital 5.1 channel soundtracks, you will
need to use the Downmix options. You have the following setup options:
LT/RT: If you set to LT/RT, a mixed signal of the surround signal will be pro-
duced on the left and right output. The left output signal consists of the front left
signal plus centre and the sum signal of the left and right signal of the surround
speakers. The right output signal consists of the front right signal plus sub-
woofer plus the difference signal of the left and right signal of the surround
speakers. This setting should be used only with Dolby Pro Logic receivers
capable of decoding this signal type.
Stereo: If you plan to use the Stereo Analog outputs for a connection to a TV
or receiver, you must enable this setting to downmix the 5.1 channel sound-
tracks of most DVD movies to a stereo format. If you set to Stereo, the left sig-
nal consists of the front left signal plus surround left signal and sum signal of
the centre and subwoofer. The right signal consists of the front right signal plus
surround right signal and sum signal of the centre and subwoofer. This setting
should be used for most televisions and Stereo Audio equipment.
SPDIF Output
SPDIF (Sony / Philips Digital InterFace) refers to the digital audio format used
by most consumer electronics equipment, as well as the coaxial and optical dig-
ital audio output connectors.
SPDIF off: Please select this option to switch the digital output off. Please
note that the analogue outputs are still enabled.
USER PREFERENCES
Language Video Audio Security General
Audio setup page
Downmix STR LT/RT
SPDIF output RAW Stereo
Dual mono STR
Dynamic
Set the downmix mode
Language Video Audio Security General
Audio settings
Downmix STR SPDIF off
SPDIF output RAW SPDIF/RAW
Dual Mono STR SPDIF/PCM
Dynamic
Set the SPDIF output
Language Video Audio Security General
Video settings
Brightness 0
Press ‘ENTER’ to return
Language Video Audio Security General
Audio setup page
Downmix STR
SPDIF output RAW
Dual mono STR
Dynamic
Go to audio setup page
Language Video Audio Security General
Video settings
Contrast 0
Press ‘ENTER’ to return
