Operation of rear panel
1. COAXIAL: Digital coaxial audio output for connection to a digital
audio device (amplifier/receiver). Please note that the
amplifier/receiver has to be compatible to Dolby Digital,
MPEG and/or PCM (for more information please refer to
the manual of your amplifier/receiver).
2. AUDIO OUT L/R: Analogue 2-channel audio outputs (white/red socket) for
connection to a television, AV receiver, beamer or stereo
system.
3. VIDEO: Composite video output (yellow socket) for connecting to
a TV or AV receiver with a video input (CVBS, compos-
ite video) by an audio/video cable.
4. RGB / SCART: For connection to a television or monitor that is compat-
ible with this kind of connection by means of a 21-pin
SCART cable. This connection enables the output of
audio and video signals.
5. REGION CODE: Indicates that the device is set to DVD region code “2”.
6. P-SCAN: High quality video output for connection to the compo-
nent video inputs of a television, AV receiver, beamer or
monitor by means of a YCbCr connecting cable. Please
note that the Progressive Scan signal is only available
over the component video output.
7. AC IN: This device has a fixed power cord. Plug the other end
of the fixed power cord into the wall socket.
8. S-VIDEO: S-Video output for connecting to a TV or AV receiver with
S-Video input by an S-Video cable. The S-Video output
can be used instead of the video output. By this, a high-
er video quality can be reached than with composite
video.
13
OPERATION
12 3 4 5 6 7
8
ENG