138443
31
Zoom out
Zoom in
Previous page
1/37
Next page
Video Setup Options
Adjusting Video Settings in the Video Setup Page
The Video Setup Page contains settings that will be determined by the type
of TV you’re using, along with settings based on your personal preferences.
You can adjust the player to function with NTSC or PAL television types, as
well as normal and wide screen models. Also, display properties such as
Sharpness, Brightness and Contrast may be adjusted with this menu.
TV TYPE - PAL/MULTI/NTSC
Your DVD Player will work with TVs based on the NTSC and PAL
standards, as well as TV designed to function with both standards, or
“Multi” models. NTSC is the standard TV system used in the USA, Canada,
Japan and many other countries. The PAL TV system is used in Europe,
Africa and the Middle East, among other places. Refer to your TV’s
documentation to make sure which model you have.
TV DISPLAY - (NORMAL /PS4:3)/(NORMAL/LB4:3)/WIDESCREEN16:9
You can setup your DVD Player to work with normal and wide screen televisions. If you are using a wide screen TV,
set this option to WIDESCREEN16:9 to match the aspect ratio of your TV. When used with a normal TV (4:3 aspect
ratio), the NORMAL/PS4:3 setting results in the typical “Pan & Scan” display, where a movie is clipped on the sides
to fit into the TV screen. The NORMAL/LB4:3 setting will enable the “Letterbox” format, where the movie is presented
in wide screen format with black lines at the top and bottom of the screen.
SHARPNESS, BRIGHTNESS & CONTRAST - HIGH/MEDIUM/LOW, +-16
You may adjust the Sharpness of the picture to one of three levels: High, Medium or Low. The Brightness and
Contrast are adjustable from -16 to +16. Use the UP and DOWN ARROW keys to adjust the Brightness and Contrast.
SetupEnter
VIDEO SETUP PAGE
TV DISPLAY
SHARPNESS
BRIGHTNESS
MAIN PAGE
MULTI
TV TYPE PAL
NTSC
CONTRAST
To Reset to NTSC:
STOP > SETUP > DOWN ARROW > DOWN ARROW > ENTER > RIGHT ARROW > DOWN ARROW > DOWN ARROW > ENTER
To Reset to PAL:
STOP > SETUP > DOWN ARROW > DOWN ARROW > ENTER > RIGHT ARROW > UP ARROW > UP ARROW > ENTER
Quick Tips
Use Caution when Changing the TV Type
Choosing the wrong TV Type may cause the screen to flicker and become unreadable. So, change
this setting with caution. If you have changed the TV Type to the wrong setting, you may need to
program the correct setting without being able to read the display. In this case, take the disc out of
the player and turn the power off. After a few seconds, turn the power on and input one of the
following code sequences to change the TV Type:
31
VIDEO OUTPUT
VIDEO OUTPUT - YCbCr/S-VIDEO
3
2
1
VIDEO
VIDEO
S-VIDEO
OUT
Y
Cb
Cr
COMPONENT
VIDEO
VIDEO
OUT
3
2
1
Choose the setting that corresponds to the Video Output Connector you are using:
COMPOSITE VIDEO OUT: This is the typical connection type supported on most TVs.
This connection does not require a change to the VIDEO OUTPUT setting.
S-VIDEO OUT: You must first connect the unit using the COMPOSITE VIDEO
connector and cable in order to enter SETUP and change this setting to S_VIDEO,
activating the S-VIDEO Output. Next, connect the unit using the S-VIDEO cable and
unplug the COMPOSITE video cable. Switch the TV’s Video Input setting to S-VIDEO.
COMPONENT VIDEO OUT: You must first connect the unit using the COMPOSITE VIDEO connector and
cable in order to enter SETUP and change this setting to YCbCr, activating the COMPONENT VIDEO Outputs.
Next, connect the unit using the COMPONENT VIDEO cables and unplug the COMPOSITE video cable.
Adjust the TV’s Video Input setting to correspond to the COMPONENT Input.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cyberhome ch dvd 402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cyberhome ch dvd 402 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info