138443
15
Zoom out
Zoom in
Previous page
1/37
Next page
After Video and Audio Cables are Connected and Power is Applied
Once the DVD Player is properly connected to your TV and possibly your receiver also, turn on your TV and make
sure it’s set to the correct input channel. The video input is usually configured as channel 0 or 1 on most TVs, but
may be referred to as “Input 1” or “Aux In” or similar names. These procedures assume you are using a NTSC-
compatible TV - standard for North and South America. If you are using a PAL-type, you will need to change the TV
Type first. In this case, see Adjusting Audio and Video Settings.
Power on the DVD Player
Push the Power button firmly to turn on the player. You
should see the message “ON” in the DVD Display. Then, the
player will attempt to read a disc. With no disc in the unit, the
message INSERT DISC will be displayed.
5
4
6
C
+10
2
1
3
8
7
9
0
ZOOM
EFFECT
1/ALL
REPEAT
RETURN
SLOW
SUBTITLE AUDIO ANGLE
POWER
GOTO
PBC
SETUP
OPEN/CLOSE
TITLE
DISPLAY
PROG
MENU
A-B
BOOKMARK
INTRO
PAUSE
ENTER
PLAY
STOP
MUTE
POWER
1
OFF
ON
Quick Tips
About Standby Mode
Your DVD Player is
equipped with a power-
saving feature called
STANDBY MODE. When
you press POWER on the
Remote to turn off the
unit, it will enter standby
mode, indicated by a
glowing LED to the left of
the disc try, where it can
be quickly awakened by
pressing POWER again.
When the unit has not
been used for a length of
time - about 25 minutes -
the unit will automatically
enter standby mode to
save power.
2
POWER
3
OPEN/CLOSE
Powering on from the Remote
Once the power button is pushed in, the unit can be turned
off and on by the remote. When the unit is turned off by the
remote, it will go into STANDBY MODE. This allows the unit
to be quickly “awakened” by pressing the POWER key on
the remote again. When the unit is in standby mode, the
standby LED, located to the left of the disc tray, will glow.
Opening the Disc Tray
Press the OPEN/CLOSE button on the remote or on the
player (to the right of the disc tray) to insert a disc. There are
two grooves in the disc tray - 12cm and 8cm. Make sure the
disc is properly set into the tray. Small 8cm discs must be
positioned exactly in the middle groove. Press the
OPEN/CLOSE button again to close the disc tray. You will
see the message READ on the display. Once the disc is
read, you should see the menu screen for DVD discs, or
hear sound for an Audio CD. If a menu is present on the
disc, you will see the word ROOT displayed. This lets you
know you are at the beginning menu of the disc.
4
PLAY
2
3
4
The Play Button
Most DVDs will automatically display a “root” (first layer)
menu when inserted. However, some discs will require you
to press the PLAY button. Also, the PLAY button can usually
be used to quickly start a DVD movie when pressed with the
root menu displayed. This function varies with discs.
Getting Started - Powering On & Playing a Disc
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cyberhome ch dvd 402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cyberhome ch dvd 402 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info