690880
17
Zoom out
Zoom in
Previous page
1/40
Next page
PROGRAMMING GUIDE PG2
Programming Options (cont.)
Service Call - sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press Ż or Ź to choose the number to be changed. Then press
~ repeatedly to change the number value. Press Ż or Ź to choose the next number to change or choose exit
and press ~.
Access Code - sets the access code entered to access programming mode (the factory default is 1-2-3-4).
Once accessed, press Ż or Ź to choose the number to change. Then press
~ repeatedly to change the
number value (range is 1 to 4). Press Ż or Ź to choose the next number to change or choose exit and
press ~.
Banner Name - changes the banner name that appears on the display (the factory default is Curtis). No
banner name appears when all blanks are entered. Once accessed, press Ż or Ź to choose the letter to
change. Then press
~ repeatedly to change the number value. Press Ż or Ź to choose the next number to
change or choose ex and press ~ to exit.
Warmer Auto-Off - (some models) adjusts the length of time that elapses before the satellite warmer shuts off
BVUPNBUJDBMMZ5IJTGVODUJPOUBLFTQSJPSJUZPWFSUIFRVBMJUZUJNFSGBDUPSZEFGBVMUGPS(&.*'JTIPVST(FNJOJ
default is “disabled”). The range is 1 to 12 hours. Once accessed, press Ż or Ź to adjust the number of
hours. Then press ~ to set and exit.
P-Maintenance - turns on/off and adjusts the P-Maintenance (preventive maintenance) brew monitor
(the factory default is OFF). When ON, the UCM measures the number of gallons brewed before the
1.BJOUFOBODFSFNJOEFSBQQFBSTPOUIFEJTQMBZ5IFSBOHFJT0''UPHBMMPOT0ODFBDDFTTFEQSFTTŻ
or Ź to choose the desired setting, then, press
~ to exit.
Beeper On/Off - turns the beeper that is heard each time a button is pressed on or off (the factory default is
ON). Once accessed, press Ż or Ź to choose the desired setting. Then, press ~ to exit.
Drip-out Mode - TFUTUIFESJQPVUNPEFUJNFS"GUFSXBUFSTUPQTnPXJOHJUBMMPXTBEEJUJPOBMUJNFGPSUIFXBUFS
to drain from the brew basket before the brew basket lock releases (the factory default is 2 min.). This feature
SFEVDFTUIFDIBODFUIBUUIFCSFXCBTLFUXJMMCFSFNPWFEUPPFBSMZ5IFSBOHFJT0''UPNJOVUFT0ODF
accessed, press Ż or Ź to choose desired setting, then, press
~ to exit.
Warmers Default - (some models) sets the warmer temperature (the factory default is MED). The available
TFUUJOHTBSF0'')*()'.&%'PS-08'5IFUFNQFSBUVSFTFUUJOHTBSF'0ODF
accessed, press Ż or Ź to choose the desired setting, then press ~. On twin brewers press Ż or Ź to choose
the desired setting for the second warmer, then press ~. Press ~ to exit. *OFF option not available on GEMX
TFSJFTNPEFMT(&.*'BOE(&.9POMZUFNQFSBUVSFTCBTFEPOBCSFXUFNQFSBUVSFPG¡'
Display Brew Time - turns the display of the brew time during brewing on or off (the factory default is ON).
Once accessed, press Ż or Ź to choose the desired setting, then press ~ to exit.
Display Messages - turns display of the message “Rinse Server Before Brewing” ON or OFF (the factory
default is ON). Once accessed, press Ż or Ź to choose the desired setting, then press ~ to exit.
[QT] Display Timers [On/Off] - (some models, QT Alarm must be on) turns the quality timer countdown
display ON or OFF (the factory default is OFF). Once accessed, press Ż or Ź to choose the desired setting.
Then, press ~ to exit.
QT Alarm On/Off - (some models) turns the quality timer alarm ON or OFF (the factory default is ON for
Gemini models, OFF for GEMIF and GEMX). An audible alarm goes off when the quality timer has expired.
Once accessed, press Ż or Ź to choose the desired setting. Then, press ~ to exit.
8$130(3"..*/((6*%&ø '
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Curtis G3TPX2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Curtis G3TPX2 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info