810364
318
Zoom out
Zoom in
Previous page
1/396
Next page
316
Miscellaneous situations
Remove the lid and let it hang from the vehi-
cle.
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
›››Fig.202 , ››› . Use a suitable object
that can completely and securely tighten the
towing eye in its housing.
After towing, unscrew the towing eye clock-
wise with a suitable object.
Replace the cover and press until the tab
snaps into the bumper.
Clean the towing eye if necessary and then
store it in the luggage compartment along with
the other vehicle tools.
NOTICE
The towing eye must always be completely
and rmly tightened. Otherwise, it could be
released while towing and tow-starting.
If the vehicle is factory-equipped with a
towing bracket, it is only allowed to tow with a
tow bar if this has been specially designed to
be installed with a tow hitch. If an unsuitable
tow bar is used, both the tow hitch and the
vehicle may be damaged. Instead, a tow rope
should be used.
Fuses
Introduction
In general, a fuse can be assigned to various
electrical components. Likewise, an electrical
component can be protected by several fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a specialised
workshop as soon as possible.
WARNING
The high voltages in the electrical system can
give serious electrical shocks, causing burns
and even death!
Never touch the electrical wiring of the ig-
nition system.
Take care not to cause short circuits in the
electrical system.
WARNING
Using unsuitable fuses, repairing fuses or
bridging a current circuit without fuses can
cause a re and serious injury.
Never use a fuse with a higher value. Only
replace fuses with a fuse of the same amper-
age (same colour and markings) and size.
Never replace a fuse by a metal strip, staple
or similar.
NOTICE
To prevent damage to the vehicle’s elec-
trical system, before replacing a fuse always
turn o the ignition, the lights and all electri-
cal elements.
Protect the fuse boxes when open to pre-
vent the entry of dust or humidity as they can
damage the electrical system.
Note
In the vehicle, there are more fuses than
those indicated in this chapter. These should
only be replaced by a specialist workshop.
Fuses inside the vehicle
Fig.203 On the dashboard on the driver
side: lid of the fuse box.
318


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor e-HYBRID - 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor e-HYBRID - 2023 in the language / languages: English as an attachment in your email.

The manual is 7.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor e-HYBRID - 2023

Cupra Formentor e-HYBRID - 2023 User Manual - German - 428 pages

Cupra Formentor e-HYBRID - 2023 User Manual - Dutch - 424 pages

Cupra Formentor e-HYBRID - 2023 User Manual - French - 436 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info