Manual Cupra Formentor e-HYBRID - 2023 (page 101 of 396) (English)

810364

101

Zoom out

Zoom in

1/396

Opening and closing

Rear lid

sensors located below the rear bumper (Easy

Open ›››page100). The rear lid will open

automatically.

Closing the rear lid

●Briey press the button on the rear lid

›››Fig.76, ››› in Introduction on page97.

●EITHER: pull the button on the driver

door upwards ›››Fig.77 (only while the igni-

tion is on).

●OR: on vehicles with Keyless Access, press

and hold the vehicle key button until the

rear lid is closed or move one foot in the area

of the sensors located below the rear bumper

(Easy Open ›››page100). The vehicle key

must be in the Keyless Access system detec-

tion zone at the rear outside the vehicle.

●OR: manually move the rear lid in the direc-

tion of closing until it closes automatically.

●The rear lid goes down automatically to the

nal position and also closes automatically

››› in Introduction on page97.

Interrupting opening or closing

After beginning to open or close the rear lid,

the action can be halted by pressing one of the

buttons .

If you press one of the buttons again, the

rear lid will move again in the original direction.

If the rear lid meets with resistance or an ob-

stacle during the automatic opening or closing,

opening or closing will be interrupted imme-

diately. For the closing process, the rear lid

opens again slightly.

● Check why it has not been possible to open

or close the rear lid.

●Try to open or close the rear lid again.

●If necessary, the rear lid can be opened or

closed by hand using reasonable force.

Particular features if towing a trailer

If the factory-tted towing bracket is electri-

cally connected to a trailer ›››page288, the

electric rear lid can only be opened or closed

with the buttons on the rear lid itself or by us-

ing the Easy Open function.

Audible warnings

Throughout the process of opening or clos-

ing the rear lid, acoustic warnings can be

heard. Exception: when the rear lid is opened

manually using the handle or the Easy Open

function with the movement of the foot or

closed using the button on the rear lid itself

›››Fig.76.

Modifying and memorising the opening an-

gle

If the space behind or above the vehicle is less

than the travel area of the rear lid, you can

change the opening angle of the rear lid.

To memorise a new opening angle, the rear lid

must be open at least halfway.

● Interrupt the opening process in the desired

position.

●Press the ›››Fig.76 button on the rear lid

for at least 3 seconds.

The opening angle is memorised. Memorisa-

tion is indicated by blinking of the hazard warn-

ing lights and an audible warning.

Resetting and memorising the opening an-

gle

For the rear lid to reopen completely, the

opening angle must be reset and memorised

again.

● Release the rear lid and open it to the mem-

orised height.

●Lift the rear lid by hand as far as it goes. To do

this, some force will have to be used.

●Press the ›››Fig.76 button on the rear lid

for at least 3 seconds.

●This resets and memorises the factory-set

opening angle. Memorisation is indicated by

blinking of the hazard warning lights and an

audible warning.

Automatic protection against overheating

If the system is operated repeatedly in a short

space of time, it automatically switches o to

prevent overheating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor e-HYBRID - 2023 in the language / languages: English as an attachment in your email.

The manual is 7.81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor e-HYBRID - 2023

Cupra Formentor e-HYBRID - 2023 User Manual - German - 428 pages

Cupra Formentor e-HYBRID - 2023 User Manual - Dutch - 424 pages

Cupra Formentor e-HYBRID - 2023 User Manual - French - 436 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cupra Formentor e-HYBRID - 2023 Manual

Product: