817300
361
Zoom out
Zoom in
Previous page
1/404
Next page
Wheels and tyres
359
Tyre repair
1
2
3
4
5
6
7
8
9
10
11
Use the puncture repair kit only if you are
familiar with the necessary operations. Oth-
erwise, you should seek professional assis-
tance.
The puncture repair kit should only be
used in an emergency, to reach the nearest
garage.
Replace tyres repaired with the puncture
kit as soon as possible.
The sealant is harmful to health and must
be cleaned o immediately if it comes into
contact with the skin.
Always keep the puncture repair kit out of
the reach of children.
WARNING
A tyre lled with sealant does not have the
same driving properties as a conventional
tyre.
Never drive faster than 80km/h (50mph).
Avoid full throttle, braking heavily and cor-
nering at high speeds.
Drive for only 10 minutes at a maximum
speed of 80 km/h (50mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired tyre sealant in
accordance with the relevant legal require-
ments.
Note
You can purchase new bottles of tyre sealant
from CUPRA specialist dealers or any SEAT
network dealer.
Note
Take into account the separate instruction
manual provided by the tyre mobility system
manufacturer.
Anti-puncture kit contents
Fig.240 Standard display: contents of the
anti-puncture kit.
The anti-puncture kit is located underneath
the oor covering in the luggage compart-
ment. Includes the following components
›››Fig.240:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual eld, to
remind that the maximum advisable speed
“max.80 km/h” or “max.50mph”
Filler tube with cap
Air compressor (depending on the version,
the model may vary).
ON/OFF switch
Air bleed screw (it can also be integrated in
the inator tube).
Warning provided by tyre pressure moni-
toring system (it can also be integrated in
the inator tube).
Tube for inating tyres
12 volt connector
Bottle of sealant
Spare tyre valve
The valve insert remover 1 has a gap at the
lower end for a valve insert. The valve insert
can only be screwed or unscrewed in this way.
This also applies to its replacement part 11 .
Sealing and inating a tyre
Sealing the tyre
Unscrew the tyre valve cap and insert. Use
the device ›››Fig.240 1 to remove the valve
cap. Place it on a clean surface.
361


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor 2024 in the language / languages: English as an attachment in your email.

The manual is 17.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor 2024

Cupra Formentor 2024 User Manual - Dutch - 430 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info