817300

Cupra Formentor 2024 Manual

350
Zoom out
Zoom in
Previous page
1/404
Next page
348
Wheels and tyres
●Avoid fast cornering and hard acceleration.
●Inspect the tyres for irregular wear from time
to time.
Tyre pressure
The values of the tyre pressure are shown on
the sticker label located on the read frame of
the front left door ›››Fig.229.
Insuicient or excessive pressure greatly re-
duces the useful life of the tyres and adversely
aects vehicle performance and ride. Correct
ination pressures are very important, espe-
cially at high speeds.
The tyre pressure must be adjusted according
to the load the vehicle is carrying. If the vehicle
is going to be fully loaded, increase the tyre
pressure to the maximum load value shown on
the sticker label ›››Fig.229.
Do not forget the spare wheel when checking
the tyre pressures: Keep this spare wheel ina-
ted to the highest pressure required for the
road wheels.
In the case of a minimised temporary spare
wheel (125/70 R16 or 125/70 R18) inate to a
pressure of 4.2 bar as indicated on the tyre
pressure label ›››Fig.229.
Driving style
Fast cornering, heavy acceleration and hard
braking (squealing tyres) all increase tyre wear.
Wheel balance
The wheels on new vehicles are balanced.
However, certain circumstances may lead to
imbalance (run-out), which is detected as vi-
brations in the steering wheel.
Unbalanced wheels should be rebalanced, as
they otherwise cause excessive wear on steer-
ing, suspension and tyres. A wheel must also
be rebalanced when a new tyre is tted or if a
tyre is repaired.
Incorrect wheel alignment
Incorrect running gear alignment causes ex-
cessive tyre wear, impairing the safety of the
vehicle. If you notice excessive tyre wear, you
should check wheel alignment at a specialised
CUPRA Service or SEAT Oicial Service.
WARNING
Unsuitable handling of the wheels and tyres
may lead to sudden tyre pressure losses, to
tread separation or even to a blow-out.
●The driver is responsible for ensuring that
all of the vehicle tyres are correctly ina-
ted to the right pressure. The recommen-
ded tyre pressure is indicated on the label
›››Fig.229.
●Check tyre pressures regularly and ensure
they are maintained at the pressures indica-
ted. Tyre pressure that is too low could cause
overheating, resulting in tread detachment
or even burst tyres.
●Tyre pressure should be that indicated on
the label when the tyres are cold at all times
›››Fig.229.
●Regularly check the cold ination pressure
of the tyres. If necessary, change the tyre
pressure of the vehicle tyres while they are
cold.
●Regularly check your tyres for damage and
wear.
●Never exceed the maximum permitted
speed or loads specied for the type of tyre
tted on your vehicle.
For the sake of the environment
Under-inated tyres will increase fuel con-
sumption.
Tread wear indicators
Fig.230 Tyre prole: tread wear indicators.
… 350 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor 2024 in the language / languages: English as an attachment in your email.

The manual is 17.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor 2024

Cupra Formentor 2024 User Manual - Dutch - 430 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info