Manual Cupra Formentor 2024 (page 334 of 404) (English)

817300

334

Zoom out

Zoom in

1/404

332

Checking and relling levels

● If the level is below the minimum level mark

( ) on the tank, top up with coolant. When

the motor is warm, the coolant level may be

slightly above the upper mark.

Topping up the uid

When the motor coolant level is too low, the

coolant warning light comes on. In this case,

immediately seek assistance from specialist

personnel.

If the coolant level is too low and there is no

workshop nearby, note the following:

●Always protect your face, hands and arms

from hot coolant or steam by placing a suita-

ble cloth over the cap of the motor coolant

expansion tank.

●Carefully unscrew the cap ››› .

●Only top up with fresh coolant according to

CUPRA specications ›››page330.

●Only top up with coolant if there is still some

coolant left in the expansion tank; otherwise

the motor could be damaged! If you do not see

any coolant in the expansion tank, do not con-

tinue driving and seek specialist assistance.

● If there is still some coolant left in the ex-

pansion tank, top up with coolant up to the

tank’s upper mark and check the level the next

day. If the level drops again, go to a workshop

and request a check of the cooling system.

●The coolant level must be between the

marks on the expansion tank ›››Fig.219.

Never exceed the top edge of the marked

area ››› .

●Screw the cap on tightly.

● If engine coolant with the recommended

specications is not available in an emergency,

do not use any other coolant additive! In this

case, top up with distilled water ››› only.

Next, ensure that the recommended additive

is topped up as soon as possible in the correct

proportion ›››page330.

WARNING

Steam and hot motor coolant can cause se-

vere burns.

●Never open the front bonnet if you see

or hear steam or coolant escaping from the

front compartment. Always wait until you can

no longer see or hear steam or coolant es-

caping. Touching hot parts can result in skin

burns.

●Before opening the front bonnet, please

note the following:

–Apply the electronic parking brake.

–Always keep children away from the front

compartment and never leave them unat-

tended.

●When the motor is hot, its cooling system is

pressurised. Do not open the expansion tank

cap, hot coolant may splash out and cause

severe burns and other injuries.

–Turn the cap slowly and very carefully an-

ticlockwise while pressing it down slightly.

–Always protect your face, hands and arms

from the hot coolant and steam with a

large thick cloth.

NOTICE

Only use distilled water! Other types of wa-

ter contain chemical substances that could

cause signicant corrosion damage. If you

have added non-distilled water, have all of

the motor cooling system uid changed im-

mediately by a specialist workshop.

●When topping up the, do not ll over the

upper edge of the marked area ›››Fig.219.

Otherwise, when the temperature rises the

excess uid will be expelled from the motor

cooling system and could cause damage.

●If the system leaks a lot of coolant, only

rell once the motor has cooled down com-

pletely. If there is a signicant loss of coolant,

there may be leaks in the cooling system. Im-

mediately go to a specialist workshop to have

the system checked. This could result in mo-

tor damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor 2024 in the language / languages: English as an attachment in your email.

The manual is 17.66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor 2024

Cupra Formentor 2024 User Manual - Dutch - 430 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cupra Formentor 2024 Manual

Product: