810366
350
Zoom out
Zoom in
Previous page
1/396
Next page
348
Wheels and tyres
Loosening wheel nuts
Fig.226 T
yre change: slacken the wheel
bolts.
Use only the wheel wrench belonging to the
car to loosen the wheel bolts.
Loosen the wheel bolts only about one turn
before raising the vehicle with the jack.
If the wheel bolt is very tight, carefully push on
the end of the wheel wrench with your foot.
Hold on to the vehicle for support and take
care not to slip during this operation.
Loosening wheel nuts
Fit the box spanner into the bolt as far as it
will go ›››Fig.226.
Hold the wrench at the end and rotate
the bolt approximately one turn anticlock-
wise››› .
Important information about wheel bolts
Factory-tted rims and wheel bolts are spe-
cially matched during construction. Therefore,
if dierent rims are tted, the correct wheel
bolts with the right length and heads must
be used. This ensures that wheels are tted
securely and that the brake system functions
correctly.
In certain circumstances, you should not even
use wheel bolts from vehicles of the same
model.
WARNING
If the wheel bolts are not properly tightened,
they could come loose while driving and
cause an accident, serious injury and loss of
vehicle control.
Use only wheel bolts which correspond to
the rim in question.
Never use dierent wheel bolts.
Wheel bolts and threads should be clean,
free of oil and grease, and it should be possi-
ble to screw them easily.
To loosen and tighten wheel bolts, only
use the wheel wrench that came with the car
from the factory.
The wheel bolts should only be loosened
slightly (about one turn) before raising the
vehicle with the jack. Risk of accident!
Never apply grease or oil to wheel bolts or
to the wheel hub threads. Even if the bolts
have been tightened to the prescribed tor-
que, they could come loose while driving.
Never loosen the screwed joints of wheel
rims with bolted ring trims.
If wheel bolts are tightened below the
prescribed torque, the bolts and rims could
come loose while driving. If tightening torque
is too high, the wheel bolts or threads can be
damaged.
Raise the vehicle
Fig.227 Jack position points.
350


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2022 in the language / languages: English as an attachment in your email.

The manual is 7.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2022

Cupra Formentor - 2022 User Manual - German - 415 pages

Cupra Formentor - 2022 User Manual - Dutch - 424 pages

Cupra Formentor - 2022 User Manual - French - 436 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info