810366

Cupra Formentor - 2022 Manual

306
Zoom out
Zoom in
Previous page
1/396
Next page
304
Fuel and exhaust gas cleaning
Fill AdBlue®
Fig.194 AdBlue tank cap®.
Operations prior to relling
Park the vehicle on a at surface and turn o
the ignition. If the vehicle is on a slope or on
a curb, the level indicator may not detect the
rell properly.
If an AdBlue® warning message is shown on
the instrument cluster display, ll with at least
the minimum required amount (approx. 5 li-
tres). Only after adding this amount will the
system detect that AdBlue® has been added
and you will be able to start the engine again.
Fill with a rell bottle
Only use AdBlue® that complies with the ISO
22241-1 standard.
●Only use original containers.
●Open the tank cover ›››Fig.194.
●Unscrew the tank cap by turning it in an anti-
clockwise direction.
●Please observe the manufacturer's instruc-
tions, indicated on the rell bottle.
●Check the expiry date.
●Remove the cap of the rell bottle.
●Insert the neck of the bottle in the tank
ller neck vertically and screw the bottle on by
hand, by turning it in a clockwise direction.
●Press the rell bottle in the direction of the
ller neck and hold it in this position.
●Wait until the contents of the rell bottle
have been poured into the AdBlue® tank. Do
not compress or break the bottle!
●Turn the bottle in a counter-clockwise direc-
tion and gently pull it upwards ›››page304.
●The AdBlue® tank is full when no more liquid
comes out of the bottle.
●Screw on the tank cap in a clockwise direc-
tion until it is tightly closed.
●Close the fuel tank ap.
Relling AdBlue® at the dispenser
Valid for vehicles with selective catalytic reduc-
tion.
● Open the tank cap.
●Turn the SCR tank cap anti-clockwise
›››Fig.194.
●Fill with AdBlue® until the nozzle stops for
the rst time.
●Close the SCR tube by turning it clockwise
until you hear a click.
Operations before driving
●After relling the tank, only switch on the ig-
nition.
●Leave the ignition on for at least 30 seconds
for the system to detect the uid load.
●Make sure you wait for at least 30 seconds
before starting the engine!
WARNING
AdBlue® should only be stored in its original
container, which should be tightly closed and
kept in a safe place.
NOTICE
● When relling, the nozzle grip should be
aligned downward. Otherwise the nozzle will
not connect automatically.
●Do not try to add any more additive after
the nozzle has stopped for the rst time. The
AdBlue® tank could overow and AdBlue®
could spill out.
●Only use AdBlue® that complies with the
ISO 22241-1 standard. Only use original con-
tainers.
… 306 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2022 in the language / languages: English as an attachment in your email.

The manual is 7.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2022

Cupra Formentor - 2022 User Manual - German - 415 pages

Cupra Formentor - 2022 User Manual - Dutch - 424 pages

Cupra Formentor - 2022 User Manual - French - 436 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info