810365
47
Zoom out
Zoom in
Previous page
1/391
Next page
Self-help
Anti-puncture kit contents
Fig. 34 Standard representation: anti-
puncture kit contents.
The anti-puncture kit is located underneath
the floor covering in the luggage compart-
ment. It includes the following components
Fig. 34:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual field, to
remind that the maximum advisable
speed “max. 80 km/h” or “max. 50 mph”
Filler tube with cap
Air compressor (depending on the ver-
sion, the model may vary).
ON/OFF switch
1
2
3
4
5
Air bleed screw (it can also be integrated
in the inflator tube).
Warning provided by tyre pressure moni-
toring system (it can also be integrated in
the inflator tube).
Tube for inflating tyres
12 volt connector
Bottle of sealant
Spare tyre valve
The valve insert remover 1 has a gap at the
lower end for a valve insert. The valve insert
can only be screwed or unscrewed in this
way. This also applies to its replacement part
11 .
Sealing and inflating a tyre
Sealing the tyre
Unscrew the tyre valve cap and insert. Use
the
Fig. 34 1 tool to remove the insert.
Place it on a clean surface.
Shake the tyre sealant bottle vigorously
Fig. 34 10 .
Screw the inflator tube
Fig. 34 3 into
the sealant bottle. The bottle's seal will break
automatically.
Remove the lid from the filling tube
Fig. 34 3 and screw the open end of the
tube into the tyre valve.
6
7
8
9
10
11
With the bottle upside down, empty all of
the contents into the tyre.
Remove the bottle from the valve.
Place the insert back into the tyre valve us-
ing the tool
Fig. 34 1.
Inflating the tyre
Screw the compressor tyre inflator tube
Fig. 34 8 into the tyre valve.
Check that the air bleed screw is closed
Fig. 34 6.
Start the engine and leave it running.
Insert the connector
Fig. 34 9 into the
vehicle's 12-volt socket
page 145 .
Turn the air compressor on with the
ON/OFF switch
Fig. 34 5.
Keep the air compressor running until it
reaches 2.0 to 2.5 bar
(29-36 psi/200-250 kPa). A maximum of 8
minutes.
Disconnect the air compressor.
If it does not reach the pressure indicated,
unscrew the tyre inflator tube from the valve.
Move the vehicle 10m so that the sealant is
distributed throughout the tyre.
Screw the compressor tyre inflator into the
valve.
Repeat the inflation process.
If the indicated pressure still cannot be
reached, the tyre is too badly damaged. Stop »
45
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2021 in the language / languages: English as an attachment in your email.

The manual is 13.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2021

Cupra Formentor - 2021 User Manual - German - 415 pages

Cupra Formentor - 2021 User Manual - French - 432 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info