810365
23
Zoom out
Zoom in
Previous page
1/391
Next page
Seat belts
The lap part of the seat belt must lie across
the pelvis, never across the stomach.
The seat belt must lie flat and fit comforta-
bly. Pull the belt tight if necessary to take up
any slack.
In the case of pregnant women, the seat
belt must lie evenly across the chest and as
low as possible over the pelvis, never across
the stomach and must be worn properly at
all times during the pregnancy
Fig. 12 .
Adapting the position of the belt webbing
to your size
The position of the seat belt can be adapted
by adjusting the height of the front seats.
WARNING
An incorrectly worn seat belt web can
cause severe or fatal injuries in the event of
an accident.
The shoulder part of the seat belt must
lie on the centre of the shoulder, never
across the neck or the arm.
The seat belt must lie flat and fit comfort-
ably on the torso
The lap part of the seat belt must lie
across the pelvis, never across the stomach.
The seat belt must lie flat and fit comforta-
bly on the pelvis Pull the belt tight if neces-
sary to take up any slack.
For pregnant women, the lap part of the
seat belt must lie as low as possible over the
pelvis and always lie flat, “surrounding” the
stomach
Fig. 12.
Do not twist the seat belt while it is fas-
tened.
Once the seat belt is positioned correctly,
don't pull it away from your body with your
hand.
Do not lie the seat belt across rigid or
fragile objects, e.g. glasses, pens or keys.
Never use seat belt clips, retaining rings
or similar instruments to alter the position
of the belt webbing.
Note
If your physical constitution prevents you
from maintaining the correct position of
the belt webbing, contact a specialised
workshop for help with any special devices
to ensure the optimum protection of the
seat belt and airbag. CUPRA recommends
taking your car in for technical service.
Seat belt tensioners
How the seat belt tensioner
works
The seat belts for the front seats and the side
rear seats are equipped with belt tensioners.
The belt tensioners are activated by sensors,
although only in severe head-on, lateral and
rear-end collisions, or in the event of the ve-
hicle overturning in the plug-in hybrid ver-
sion of the vehicle.
This retracts and tightens the seat belts, re-
ducing the forward motion of the occupants.
The belt pre-tensioners work in combination
with the airbag system. The belt pre-tension-
ers activate in combination with some of the
airbags, depending on the collision type.
Note
If the seat belt tensioners are triggered, a
fine dust is produced. This is normal and it
is not an indication of fire in the vehicle.
The relevant safety requirements must be
observed when the vehicle or components
of the system are scrapped. Specialised
workshops are familiar with these regula-
tions, which are also available to you.
Maintenance and disposal of seat
belt tensioners
The belt tensioners are components of the
seat belts that are installed in the seats of
your vehicle. If you work on the belt tension-
ers or remove and install parts of the system
when performing other repair work, the seat
belt may be damaged. The consequence »
21
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2021 in the language / languages: English as an attachment in your email.

The manual is 13.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2021

Cupra Formentor - 2021 User Manual - German - 415 pages

Cupra Formentor - 2021 User Manual - French - 432 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info