Manual Cupra Formentor - 2020 (page 105 of 352) (English)

817289

105

Zoom out

Zoom in

1/352

Opening and closing

Opening the rear lid

●Unlock the vehicle

››› page 91 and briefly

press the handle of the rear lid. On vehicles

with Keyless Access you can directly press

the handle of the rear lid. The rear lid is un-

locked if an authorised key is recognised in

the proximity of the vehicle.

●OR: depending on the features, pull the 

button on the driver door upwards

››› Fig. 79.

The button also works when the ignition is

switched off.

●OR: press and hold the  button of the

vehicle key for approx. 1 second. If the vehi-

cle is locked, only the rear lid is unlocked (the

doors remain locked).

●OR: on vehicles with Keyless Access and

sensor-controlled opening you can open the

rear lid by moving one foot in the area of the

sensors located below the rear bumper (Easy

Open

››› page 104 ). The rear lid will be auto-

matically opened.

Closing the rear lid

●Briefly press the  button on the rear lid

››› Fig. 78 ››› in Introduction on page 101.

●OR: depending on the features, pull the 

button on the driver door upwards

››› Fig. 79.

●OR: on vehicles with Keyless Access, press

and hold the  vehicle key button until the

rear lid is closed, or move one foot into the

area of the sensors located below the rear

bumper (Easy Open)

››› page 104 . The key

of the vehicle must not be further away than

1.5 m from the boot or inside the vehicle.

●OR: manually move the rear lid in the di-

rection of closing until it closes automatical-

ly.

●The rear lid goes down automatically to the

final position and also closes automatically

››› in Introduction on page 101.

Interrupting opening or closing

After beginning to open or close the rear lid,

the action can be halted by pressing one of

the  buttons.

Continue opening or closing the rear lid by

hand. To do this, some force will have to be

used.

If you press one of the  buttons again, the

rear lid will move again in the original direc-

tion.

If the rear lid is met with resistance or an ob-

stacle during the automatic opening or clos-

ing, opening or closing will be interrupted

immediately. For the closing process, the

rear lid opens again slightly.

●Check why it has not been possible to

open or close the rear lid.

●Try to open or close the rear lid again.

●If necessary, the rear lid can be opened or

closed by hand using reasonable force.

Particular features if towing a trailer

If the factory-fitted towing bracket is electri-

cally connected to a trailer

››› page 275 , the

electric rear lid can only be opened or closed

with the buttons on the rear lid itself.

Acoustic warnings

Throughout the process of opening or clos-

ing the rear lid, acoustic warnings can be

heard. Exception: when the rear lid is

opened manually using the handle or the

Easy Open function with the movement of

the foot or closed using the button on the

rear lid itself

››› Fig. 78.

Modifying and memorising the opening

angle

If the space behind or above the vehicle is

less than the travel area of the rear lid, you

can change the opening angle of the rear lid.

To memorise a new opening angle, the rear

lid must be open at least halfway.

●Interrupt the opening process in the de-

sired position.

●Press the  button

››› Fig. 78 on the rear

lid for at least 3 seconds.

The opening angle is memorised. Memorisa-

tion is indicated by blinking of the hazard

warning lights and an audible warning. »

103

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2020 in the language / languages: English as an attachment in your email.

The manual is 5.27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2020

Cupra Formentor - 2020 User Manual - German - 376 pages

Cupra Formentor - 2020 User Manual - French - 384 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cupra Formentor - 2020 Manual

Product: