Manual Cupra Formentor - 2020 (page 98 of 352) (English)

817289

Zoom out

Zoom in

1/352

Operation

●After a time.

●OR: if the vehicle is unlocked with the but-

ton  on the key.

●OR: if the boot is opened.

●OR: if the vehicle is unlocked manually with

the key.

Keyless Access temporary disconnection

function*

You can deactivate the vehicle's Keyless

Access unlocking for one locking and un-

locking cycle.

●Move the gear lever to position P since

otherwise the vehicle cannot be locked.

●Close the door.

●Push the central locking button  on the

remote control and touch the locking sensor

surface of the driver door handle

››› Fig. 73 B within the following 5 seconds.

Do not grasp the door handle; otherwise the

vehicle will not unlock. Deactivation is also

possible if the vehicle is locked through the

driver’s door lock.

●To check that the function has been deac-

tivated, wait at least 10 seconds, grip and pull

on the door handle. The door should not

open.

The next time the door can only be unlocked

via the remote control or the lock cylinder.

The next time the door is locked/unlocked,

Keyless Access will be active again.

Keyless Access permanent disconnection

function*

You can deactivate the vehicle unlock with

Keyless Access permanently in the infotain-

ment system so that others cannot unlock or

start the vehicle.

Convenience functions

To close all the electric windows and the

sunroof using the comfort function, keep a

finger for a few seconds on the locking sen-

sor surface

››› Fig. 73 B (arrow) of the door

handle until the windows and roof have

closed.

How the doors open when touching the

sensor surface on the door handle will de-

pend on the settings that have been activa-

ted in the infotainment system, using the

function button  > Exterior > Closing.

CAUTION

The sensor surfaces on the door handles

could engage if hit with a water jet or high

pressure steam if there is a valid vehicle key

in the proximity. If at least one of the elec-

tric windows is open and the sensor surface

››› Fig. 73 B (arrow) on one of the handles is

activated continuously, all windows will

close.

Note

●If the vehicle battery has little or no

charge, or the vehicle key battery is almost

or entirely out of charge, you will probably

not be able to lock or unlock the vehicle

with the Keyless Access system. The vehicle

can be unlocked or locked manually

››› page 100.

●To control the proper locking of the vehi-

cle, the release function is disabled for ap-

prox. 2 seconds.

●If the message Keyless access system

faulty is displayed on the screen of the

dash panel, abnormalities may occur in the

operation of the Keyless Access system.

Contact a specialised workshop. To do so,

CUPRA recommends going to a specialised

CUPRA dealer or any SEAT dealership.

●Depending on the function set on the in-

fotainment system for the mirrors, the ex-

terior mirrors will unfold and the surround

lighting will come on when unlocking the

vehicle using the sensor surface on the

driver and passenger door handles

››› page 121.

●If there is no valid key inside the vehicle

or the system fails to detect one, a warning

will display on the dash panel screen. This

could happen if any other radio frequency

signal interferes with the key signal (e.g.

from a mobile device accessory) or if the

key is covered by another object (e.g. an

aluminium case).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2020 in the language / languages: English as an attachment in your email.

The manual is 5.27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2020

Cupra Formentor - 2020 User Manual - German - 376 pages

Cupra Formentor - 2020 User Manual - French - 384 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cupra Formentor - 2020 Manual

Product: