817289
92
Zoom out
Zoom in
Previous page
1/352
Next page
Operation
To change the battery
Fig. 68 Vehicle key: opening the battery compart-
ment cover.
Fig. 69 Vehicle key: removing the battery.
CUPRA recommends you ask a specialised
workshop to replace the battery.
The battery is located to the rear of the vehi-
cle key, under a cover.
Changing the battery
Remove the key blade from the vehicle key
page 89.
Insert the key blade into the slot
Fig. 68,
press it in the direction of arrow 1 and de-
tach the cover by levering it 2.
Extract the battery from the compartment
using a suitable thin object
Fig. 69.
Insert the new battery and press it into the
battery compartment .
Place the cover and press it into the vehi-
cle key housing until it clicks into place.
WARNING
Swallowing a battery with a 20 mm diame-
ter or any other button battery can cause
serious and even fatal injuries within a very
short time.
Keep the vehicle key and key fobs with
batteries out of reach of children.
If you suspect that someone may have
swallowed a battery, seek immediate medi-
cal attention.
CAUTION
If the battery is not changed correctly,
the vehicle key may be damaged.
Use of unsuitable batteries may damage
the vehicle key. For this reason, always re-
place the dead battery with another of the
same voltage, size and specifications.
When fitting the battery, check that the
polarity is correct.
For the sake of the environment
Please dispose of your used batteries cor-
rectly and with respect for the environ-
ment.
Synchronize the vehicle key
If the button is pressed frequently outside
of the vehicle range, it is possible that the ve-
hicle can no longer be locked or unlocked
using the key. In this case, the key must be
resynchronised as described below:
Remove the key blade from the vehicle key
page 88.
Press the button on the vehicle key. For
this, it must remain with the vehicle.
Open the vehicle within one minute using
the key blade. The key has been synchron-
ised.
If necessary, fit the cap.
90
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2020 in the language / languages: English as an attachment in your email.

The manual is 5.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2020

Cupra Formentor - 2020 User Manual - German - 376 pages

Cupra Formentor - 2020 User Manual - French - 384 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info