817289
59
Zoom out
Zoom in
Previous page
1/352
Next page
Fuses and bulbs
screw towing eye behind the lid. In this case,
the tow hitch needs to be extracted or instal-
led and used for towing
page 275 , .
Bear in mind the instructions for towing
page 54.
Assemble the rear towing eye (cars with-
out a factory-equipped towing bracket)
Remove the towing eye from the vehicle
tool kit in the luggage compartment
page 43.
Press the upper side of the lid
Fig. 45 to
unclip it.
Remove the lid and let it hang from the ve-
hicle.
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
Fig. 46 . Use a suitable object that
can completely and securely tighten the
towing eye in its housing.
After towing, unscrew the towing eye
clockwise with a suitable object.
Replace the cover and press until the tab
snaps into the bumper.
Clean the towing eye if necessary and then
store it in the luggage compartment along
with the other vehicle tools.
CAUTION
The towing eye must always be complete-
ly and firmly tightened. Otherwise, it could
be released while towing and tow-starting.
If the vehicle is factory-equipped with a
towing bracket, it is only allowed to tow with
a tow bar if this has been specially designed
to be installed with a tow hitch. If an unsuit-
able tow bar is used, both the tow hitch and
the vehicle may be damaged. Instead, a tow
rope should be used.
Fuses and bulbs
Fuses
Introduction
In general, a fuse can be assigned to various
electrical components. Likewise, an electri-
cal component can be protected by several
fuses.
Only replace fuses when the cause of the
problem has been solved. If a newly inserted
fuse blows after a short time, you must have
the electrical system checked by a special-
ised workshop as soon as possible.
WARNING
The high voltages in the electrical system
can give serious electrical shocks, causing
burns and even death!
Never touch the electrical wiring of the
ignition system.
Take care not to cause short circuits in
the electrical system.
WARNING
Using unsuitable fuses, repairing fuses or
bridging a current circuit without fuses can
cause a fire and serious injury.
Never use a fuse with a higher value. Only
replace fuses with a fuse of the same »
57
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Formentor - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Formentor - 2020 in the language / languages: English as an attachment in your email.

The manual is 5.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Formentor - 2020

Cupra Formentor - 2020 User Manual - German - 376 pages

Cupra Formentor - 2020 User Manual - French - 384 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info