817294
298
Zoom out
Zoom in
Previous page
1/355
Next page
298
Checking and relling levels
Yellow or colourless:
Black:
Check the electrolyte level
Fig.202 Sight glass on the top of the 12
volt battery (schematic representation).
Battery access
The 12 volt battery is located in the engine
compartment.
Raise the bonnet ››› in Working in the
engine compartment on page285.
Lift the cover that protects the front of the
battery.
Check the level
The electrolyte level should be checked regu-
larly in high-mileage vehicles, in hot countries
and in older batteries.
Check the colour display in the sight glass on
the top of the battery ›››Fig.202.
If there are air bubbles in the window, tap
the window gently until they disperse.
The “magic eye” indicator, located on the top
of the battery changes colour, depending on
the charge state and electrolyte level of the
battery.
There are two dierent colours:
The battery's electrolyte
level is too low. Go to a specialised work-
shop to have the battery checked and re-
placed if necessary.
The battery’s electrolyte level is cor-
rect.
Charging, replacing, disconnecting
and connecting the 12-volt battery
If you suspect that the 12-volt battery is dam-
aged or defective, have it checked by a quali-
ed specialist workshop.
Charging the 12-volt battery
Contact a specialist workshop for charging the
12-volt battery, as the battery model tted in
the vehicle in the factory uses a technology
that requires limited voltage charging ››› .
To do so, CUPRA recommends going to a spe-
cialised CUPRA dealer or any SEAT dealership.
Replacing the 12-volt battery
The 12-volt vehicle battery has been designed
to suit its location and has special safety fea-
tures. If a 12volt battery needs to be replaced,
the replacement battery must be installed by
a qualied technician. CUPRA recommends
that you visit a CUPRA dealer. Component in-
formation regarding size, maintenance, power
and safety characteristics to be met can be ob-
tained from a qualied technician, who should
have the necessary documentation and tech-
nical equipment. CUPRA recommends visiting
a specialised CUPRA dealer or any SEAT deal-
ership.
The degassing hole of the 12volt battery must
always be on side of the negative pole. The
degassing hole on the side of the positive pole
must always be sealed.
Only use maintenance-free 12volt batteries
that comply with the TL82506 and VW75073
standards. These standards must be dated Oc-
tober 2014 or later.
The 12volt battery must always be replaced
by a qualied technician, as the vehicle's elec-
tronic system must also be adjusted as part
of the replacement. In addition, the battery
parameters relating to operational safety can
only be determined with the original battery.
Only a qualied technician has both the right
technology to make the adjustment and the
correct replacement batteries.
The use of unsuitable batteries will invalidate
the approval.
Vehicles with Start-Stop functions (
›››page125) are tted with a special battery.
Therefore, it must only be replaced with a bat-
tery of the same specications.
298


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Ateca 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Ateca 2023 in the language / languages: English as an attachment in your email.

The manual is 14.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Ateca 2023

Cupra Ateca 2023 User Manual - German - 387 pages

Cupra Ateca 2023 User Manual - French - 390 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info