Manual Cupra Ateca 2018 (page 297 of 372) (English)

817302

297

Zoom out

Zoom in

1/372

Driver assistance systems

projected by the system on the Easy Connect

system screen. The bottom of the screen

displays part of the bumper corresponding

to the number plate area that will be used as

reference by the driver.

Rear assist settings

Rear assist offers the user the possibility to

change the image's brightness, contrast and

colour settings.

To change these settings:

●Park the vehicle in a safe place.

●Apply the parking brake.

●Switch the ignition on.

●If necessary, switch on the Easy Connect

system.

●Engage reverse gear or turn the selector

lever to position R.

●Press the  function button displayed on

the right of the image.

●Make the desired adjustments on the

menu by pressing the –/+ function buttons

or by moving the corresponding scroll but-

ton.

Necessary conditions for parking and ma-

noeuvring with the rear assist

The system should not be used in the follow-

ing cases:

●If the image displayed is not very reliable or

is distorted, for example low visibility or dirty

lens.

●If the area behind the vehicle is not dis-

played very clearly or is incomplete.

●If the vehicle is heavily loaded at the rear.

●If the position and installation angle of the

camera have been changed, e.g. after a rear-

end collision. Have the system checked by a

specialised workshop.

Familiarising yourself with the system

To familiarise yourself with the system, the

orientation lines and their function, CUPRA

recommends practising parking and ma-

noeuvring with the rear assist in a place with-

out too much traffic or in a car park when

there are good weather and visibility condi-

tions.

Cleaning the camera lens

Keep the camera lens clean and clear of

snow and ice:

●Moisten the lens using a normal alcohol-

based glass cleaning product and clean the

lens with a dry cloth.

●Remove snow using a small brush.

●Use de-icing spray to remove any ice.

CAUTION

●Never use abrasive cleaning products to

clean the camera lens.

●Do not use hot or warm water to remove

ice or snow from the camera lens. Doing so

could damage the camera.

Parking and manoeuvring with the

rear assist

Fig. 242 Display on the Easy Connect system

screen: guidance lines.

Switching the system on and off

●The rear assist will switch on when the igni-

tion is on or the engine running and the se-

lector lever is changed to the R position.

●The system disconnects 8 seconds after

removing the selector lever from the R posi-

tion. The system will also disconnect imme-

diately after switching off the ignition. »

295

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Ateca 2018 in the language / languages: English as an attachment in your email.

The manual is 23.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Ateca 2018

Cupra Ateca 2018 User Manual - German - 396 pages

Cupra Ateca 2018 User Manual - French - 404 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cupra Ateca 2018 Manual

Product: