817302
288
Zoom out
Zoom in
Previous page
1/372
Next page
Driving
Error messages
When the Parking Aid is activated or when it
is switched on, if a message reporting a Park-
ing aid error is displayed on the instrument
panel, there is a fault in the system.
If the fault does not disappear before dis-
connecting the ignition, the next time that
the parking aid is engaged in reverse, no au-
dible signal of the existence of a fault will be
issued.
If there is a fault in the parking aid system a
message will appear on the instrument panel
indicating the error.
If there is a fault in a sensor, the symbol is
displayed on the Easy Connect display in
front of/behind the vehicle. If a rear sensor is
faulty, only the obstacles in area A are dis-
played Fig. 232. If a front sensor is faulty,
only the obstacles in area B are displayed.
Have the fault corrected by a specialised
workshop without delay.
Driving with a trailer
Fig. 236 Parking assist display on the screen with
trailer attached.
In vehicles equipped with a towing bracket
device from the factory, when the trailer is
connected electrically, the Parking Aid rear
sensors will not be activated when reverse
gear is engaged, when the selector lever is
turned to position R or when the button is
pressed.
The distance to possible obstacles at the
rear of the vehicle and at its sides will not be
displayed on the screen and will not be indi-
cated by means of audible sound signals.
The Easy Connect system screen will only
display objects detected at the front, and the
vehicle's trajectory will be hidden.
Braking while manoeuvring function*
3 Only valid with Parking System Plus
The emergency braking function is used to
minimise damage in the event of a collision.
Depending on the equipment, if the Parking
Aid is active, the braking while manoeuvring
function activates emergency braking when
it detects an obstacle in the vehicle’s path
that could cause a collision, driving forwards
or in reverse.
The function will not brake if the Parking Aid
is activated automatically. For the system to
operate, manoeuvring speed must be be-
tween 2.5 and 10 km/h (between 1.5 and 6
mph) for the front area and between 1.5 and
10 km/h (between 1 and 6 mph) for the rear.
Following an intervention, the braking while
manoeuvring function will be inactive in the
same direction of travel for 5 metres. Once
the gear is changed, or the selector lever’s
position is changed, the function will be ac-
tive again. The Parking Aid’s limitations ap-
ply.
The braking while manoeuvring function is
controlled in the Easy Connect system with
the  button and the SETTINGS > Park
and manoeuvre function buttons.
on – permits the use of the braking
while manoeuvring function.
286
288


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Ateca 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Ateca 2018 in the language / languages: English as an attachment in your email.

The manual is 23.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Ateca 2018

Cupra Ateca 2018 User Manual - German - 396 pages

Cupra Ateca 2018 User Manual - French - 404 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info