817302
268
Zoom out
Zoom in
Previous page
1/372
Next page
Driving
The blind spot detector has been developed
for driving on paved roads.
WARNING
The smart technology incorporated into
the blind spot detector (BSD) with parking
assistance (RCTA) included cannot over-
come the limits imposed by the laws of
physics; it only works within the limits of the
system. Accidents and severe injury may
occur if the blind spot detection system or
the rear cross traffic alert are used negli-
gently or involuntarily. The system is not a
replacement for driver awareness.
Adapt your speed and safe distance to
the vehicle in front of you at all times to suit
visibility, weather, road and traffic condi-
tions.
Keep your hands on the wheel at all times
to be ready to intervene in the steering at
any time.
Pay attention to the control lamps that
may come on in the external rear view mir-
rors and on the instrument panel, and fol-
low any instructions they may give.
The blind spot assistant could react to
any special constructions that might be
present on the sides of the vehicle: e.g.
high or irregular dividers. This may cause
erroneous warnings.
Never use the blind spot detector with
rear cross traffic alert on unpaved roads.
The blind spot detector with rear cross traf-
fic alert has been designed for use on
paved roads.
Always pay attention to the vehicle's sur-
roundings.
Never use the blind spot detector or the
parking assistant if the radar sensors are
dirty.
The external rear view mirror control
lamps may have limited functionality due to
solar radiation.
CAUTION
The radar sensors on the rear bumper
may be damaged or shifted in the event of a
collision, for example, when entering or ex-
iting a parking space. This may result in the
system disconnecting itself, or at least pos-
sibly having its functionality diminished.
In order to ensure that the radar sensors
work properly, keep the rear bumper free
of snow and ice and do not cover it.
The rear bumper should only be painted
with paint authorised by CUPRA. The blind
spot detector's functions may be limited or
work incorrectly if other paints are used.
Note
If the blind spot detector with parking as-
sistant does not work as described in this
chapter, do not use it and contact a speci-
alised workshop.
Control lamps
Control lamp in external rear view mirrors:
It lights up
It lights up once briefly: the blind spot detector is acti-
vated and ready to operate.
It lights up: blind spot detector has detected a vehicle
in the blind spot.
Flashes
The blind spot detector has detected a vehicle in the
blind spot and the turn signal has been turned on in
the direction of the detected vehicle .
For vehicles that are also equipped with Lane Assist
page 260, a warning to switch lanes will also appear
even though the turn signal has not been engaged
(blind spot detector “Plus”).
Some warning and control lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.
If there are no indications from the control
lamp in the external rear view mirror, this
means that the blind spot detector has not
detected any other vehicles in the area .
If the dipped beam is on, then the control
lamps in the external rear view mirrors will be
dimmed (night mode).
266
268


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cupra Ateca 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Ateca 2018 in the language / languages: English as an attachment in your email.

The manual is 23.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Ateca 2018

Cupra Ateca 2018 User Manual - German - 396 pages

Cupra Ateca 2018 User Manual - French - 404 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info