Manual Cupra Ateca - 2022 (page 102 of 357) (English)

810370

102

Zoom out

Zoom in

1/357

100

Lights

Switching on the main beam assist

●Turn on the ignition and turn the light switch

to position .

●From the base position, press the turn sig-

nal and main beam headlights lever forwards

›››Fig.80 3.

When the main beam assist is switched on,

the control lamp on the instrument cluster

screen turns on. When the main beam is on,

the blue main beam control lamp on the

instrument cluster switches on.

Switching the main beam assist o

●Turn the headlight switch to a position other

than .

●EITHER: if main beam assist is on, pull the

turn signal light and main beam headlights

lever back ›››Fig.80 4.

●OR: if the main beam assistant is on, but the

main beam does not turn on, press the turn

signal and main beam lever forwards to turn

the main beam on manually. Pull the turn sig-

nal and main beam lever back to switch o the

main beam manually, if necessary.

● OR: switch o the ignition.

System limitations

In the following cases, the main beam head-

light must be switched o manually because

the main beam assist will not disconnect it on

time or disconnect it at all:

●On roads with insuicient lighting with very

reective signs

●If road users are insuiciently lit up, e.g. pe-

destrians or cyclists.

●On closed curves, when the traic in the

opposite direction is partially hidden, on pro-

nounced slopes or inclinations.

●On roads with traic in the opposite direction

and with a central reservation barrier where

the driver can see over it e.g. lorry drivers.

●In the event of fog, snow or heavy rain

●In the event of dust or sand storms

●If the windscreen is damaged in the camera's

eld of vision.

●If the camera's eld of vision is misted up,

dirty or covered by a sticker, snow or ice.

●If the camera is damaged or if the power

supply has been cut o.

WARNING

The convenience features of the main beam

assist should not encourage the taking of

risks. The system is not a replacement for

driver concentration.

●You are always in control of the main beam

and adapting it to the light, visibility and traf-

c conditions.

●It is possible that the main beam headlight

control does not recognise all driving situa-

tions and is limited under certain circumstan-

ces.

●When the eld of vision of the camera is

dirty, covered or damaged, operation of the

main beam control may be aected. This also

applies when changes are made to the vehi-

cle lighting system, for example, if additional

headlights are installed.

NOTICE

To avoid aecting the operation of the sys-

tem, take the following points into considera-

tion:

●Clean the eld of vision of the camera reg-

ularly and make sure it is free of snow and ice.

●Do not cover the eld of vision of the cam-

era.

●Check that the windscreen is not damaged

in the area of the eld of vision of the cam-

era.

Note

●The headlight asher can be turned on and

o manually at any time with the turn signal

and main beam lever ›››page98.

●If there are objects that radiate light in the

camera's area of inuence, e.g. a portable

navigation system, this may aect the opera-

tion of the main beam assist system.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cupra Ateca - 2022 in the language / languages: English as an attachment in your email.

The manual is 7.2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cupra Ateca - 2022

Cupra Ateca - 2022 User Manual - German - 383 pages

Cupra Ateca - 2022 User Manual - French - 390 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cupra Ateca - 2022 Manual

Product: