447900
10
Zoom out
Zoom in
Previous page
1/38
Next page
18 19
ENG
ENG
Special Features
• LCD display
• Automatic and manual zoom of 24-28-35-50-70-85 mm
• Red light ray as a focusing aid for setting the AF in low light
• TTL measurement
• Automatic speed setting for the shutter
• 5 energy levels, ratios 1/1, 1/2, 1/4, 1/8 and 1/16
• Readiness display for the flash in the seeker
• Synchronization of the foreground and background light
• Reduction of the red-eye effect (for Nikon and Olympus)
• Integrated slave function
• Integrated reflection plate and diffuser
• Energy-saving function
• Can be updated (except type P)
Inserting the Batteries
Ensure that the main switch is in the “OFF”
position. Push the lid of the battery compart-
ment forwards and swing it upwards. Insert the
batteries according to the corresponding symbols
for “+/-“.
Close the battery compartment lid and push it
back into its place until it clicks. Ensure that all
batteries are of the same type and are equally
charged; NiCd or NiMh rechargeable batteries are
preferable.
Mounting the Flash Unit onto the Camera
Switch off both the flash unit and the camera.
Turn the knurled screw of the flash unit upwards
toward the flash unit. Push the flash unit into
the camera’s device shoe. Turn the flash unit’s
knurled screw toward the camera, clamping the
flash unit to the camera.
For type S: Insert the mounting foot of the flash
unit into the device shoe of the camera. This
clicks the flash unit into place.
For type O/P: Insert the mounting foot of the
flash unit into the device shoe of the camera and
press onto “LOCK” in order to click the flash unit
into place.
Removing the Flash Unit from the Camera
Switch off both the flash unit and the camera.
Turn the knurled screw of the flash unit upwards
toward the flash unit. Remove the flash unit from
the device shoe of the camera.
For type S: Press the button that releases the
device shoe and remove the flash unit, pulling it
toward the rear.
For type O/P: Push both side of the lock/release
button in the directions specified and remove the
flash unit, pulling it toward the rear.
Activating the ON/OFF switch and Con-
ducting a Flash Test
In order to switch on the flash unit, push the main
switch into the “ON” position. As soon as the
camera is ready to be used, “READY” illuminates
on the readiness display.
Press the test button in order to check whether
the flash unit is operating correctly. If the flash
unit has lost its charge, wait until the “READY”
display illuminates again.
Push the main switch into the “OFF” position in
order to turn off the device.
LC Display Illumination
The LCD display serves in providing general
information about the camera and the current
state of the flash unit; every time the “LIGHT”
button is pressed, the LCD display will illuminate
for around 5 seconds.
Photographing, AF / TTL Operation
Automatic control of the flash
synchronization speed
When the flash unit is ready, the camera automa-
tically switches into the flash mode synchroniza-
tion speed. The synchronization speed depends
upon the camera model and is generally between
1/30 seconds and 1/250 seconds. If a photo has
been taken with the flash, the LCD display briefly
illuminates the “OK” symbol to confirm the
correct lighting.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cullmann D 4500 update at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cullmann D 4500 update in the language / languages: Dutch as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info