650788
9
Zoom out
Zoom in
Previous page
1/17
Next page
9
GENERAL ASSEMBLY
INSTRUCTIONS
Before First Use
Before using your Cuisinart
®
Elemental
TM
13-Cup
Food Processor for the first time, wash all the
parts (see Cleaning, Storage and Maintenance
Instructions on page 14).
1. Place the food processor base on a dry,
level countertop with the controls facing
toward you. Do not plug the unit in until
it is fully assembled.
Note: To use the small bowl, it must be
nested in the large bowl with the stem
adapter in place for operation.
2. Place the large work bowl on the base
and use the handle to turn the bowl
counterclockwise to lock it into place.
3. To use the small work bowl, first attach the
large work bowl to the base. Place the
stem adapter onto the shaft, then lower
the small work bowl over the adapter and
into the large bowl. Place your fingers in the
recesses of the small bowl and turn slightly to
secure in place.
Main Work Bowl Cover
Operation
1. Place the lid over the
work bowl with the
feed-tube assembly
shifted slightly to the
right of the handle.
Be sure to assemble
the hub pin into the
center of the lid.
2. Once the cover is fully
seated, rotate the cover
to the left (clockwise)
to engage the lid locking
mechanism and interlock.
3. To remove the lid, rotate
the lid approximately
¹/
¹
²
th of a turn to the
right to disengage the interlock and locking
mechanism.
Flat Work Bowl Cover Operation
Use the Flat Cover for added convenience when
your recipe calls for chopping, mixing, puréeing
or kneading. It is particularly useful when you are
preparing baked goods such as cakes, cookies,
pies and breads.
To Assemble the Flat Cover
Begin with the work bowl and the metal blade
in place. Place the Flat Cover on the work
bowl so that the Cuisinart logo written on the
cover is face up and readable. Then turn cover
CLOCKWISE to lock into place.
Make sure the small cap is in place before using.
To Disassemble the Flat Cover
Place one hand near the Cuisinart logo and one
hand on opposite end of cover; turn cover
COUNTERCLOCKWISE. Lift cover up and off
work bowl. Do not use the Flat Cover with any of
the slicing or shredding discs. Use only with the
metal blade or dough blade.
Work Bowls
The two nested work bowls offer versatile food
processing options and save you time by
minimizing cleanup. Use only the small work
bowl when processing smaller quantities.
Optimize efficiency when making recipes that
require multiple bowls, by starting with the smaller
work bowl. For example, prepare a crumb topping
before mixing batter for a cake in the large work
bowl. Or emulsify dressing before shredding
broccoli, carrots and cabbage for vegetable slaw.
Chopping certain foods may scratch or cloud the
work bowl; this will not affect the functionality of
your work bowl.
Machine Controls
High and Low Control Buttons
The High and Low controls are buttons that allow
the machine to run until Off is selected.
1. Properly assemble the machine.
2. Add ingredients to the work bowl, either
through the feed tube or directly into the bowl.
Lock lid into place.
3. Press the High or Low button. The motor
will start.
4. Press the Off button when finished.
Pulse Button
The Pulse control is a button that allows the machine
to run only while it is being pressed. This capability
provides more accurate control of the duration and
frequency of processing. Unless otherwise specified,
a pulse should be about two seconds.
With the machine properly assembled and
engaged, and ingredients in the work bowl,
press the Pulse button repeatedly as needed.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuisinart FP-13D series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuisinart FP-13D series in the language / languages: English as an attachment in your email.

The manual is 10,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cuisinart FP-13D series

Cuisinart FP-13D series Manual - English - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info