Manual Cuisinart BFP 703 CE (page 6 of 33) (English)

72231

Zoom out

Zoom in

1/33

Tip: Liquid ingredients can be measured in the measured pour lid, using

the measurement marking. Solid ingredients can be added by simply

dropping them through the fill area into the blender jar. Replace the

measured pour lid after adding ingredients.

Note: To remove blender jar cover, lift edge of cover upward. Lifting

measured pour lid will not remove cover.

3. To start blending: press the On button. The red On LED light will

flash, indicating that the blender is turned on but no speed has been

selected.

4. Press the desired blending speed: both the On indicator light and

the activated speed indicator light will glow. The blender will now be

functioning at the desired speed. It is possible to switch speeds

without pressing the Off button, by simply pushing the next desired

speed button.

5. To reset the blender: The unit has an advanced thermal resettable

fuse feature. If the event of an overload condition the unit will shut

down to protect the motor from overheating. When this happens, to

reset the unit, unplug the blender and let it cool down for a minimum

of 15 minutes. Then look to reduce the contents and/or clear any

jams, then restart as noted in the operating directions.

6. To stop the blending process: re-press the activated speed button.

The blending process will stop. The red On indicator light will

continue to flash to let you know that the blender is still on and can

be reactivated by pushing the desired speed button. The blender

can be completely deactivated and stopped from any speed by

pushing the Off button. You will need to press the On button again

to continue blending.

7. Pulse Mode: while the blender is turned on, you can create a burst

of power for quick, efficient blending by activating this function. To

do so, first push the Pulse button, which will cause the Pulse

indicator light to flash. Next, push and release the desired speed

button. Repeat as desired. You determine the duration of each pulse.

While pulsing, all indicator lights (the On, the Pulse, and the desired

speed) will glow.

The Pulse function can be used to break apart larger pieces of food

or to control the texture of food when chopping. The Pulse function

is also effective in starting the blending process when you do not

want continuous power, or when processing items that do not

require an extended amount of blending.

8. To crush ice: Use blender jar only. The SmartPower Duet

Blender/

Food Processor motor is strong enough to crush ice without liquid at

any speed; however, for your convenience we have preset the best

speed for ice crushing. To give you greater control, the Ice Crush

function automatically operates as a Pulse function. To crush ice,

place ice cubes in the blender jar, and place the cover and the

measured pour lid on the blender jar. Press the On button. Press the

Ice Crush button in short pulses until ice is crushed to desired

consistency. See the Recipe Tips section on page 12 for more

details.

9. To dislodge food: use a rubber or plastic spatula to help remove

food lodged around the cutting assembly.

DO NOT USE SPATULA UNTIL YOU HAVE TURNED OFF AND

UNPLUGGED THE BLENDER. Replace the cover and measured

pour lid and continue blending if necessary. Make sure spatula is not

inside the blender jar before blending.

10. When finished blending: press the Off button, and unplug the

blender from the electrical outlet. Never remove the blender jar from

the motor base until pressing the Off button. Do not twist locking

ring from blender jar when removing jar from motor base. Simply lift

blender jar from motor base. Do not place hands into blender jar

with blender plugged in.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cuisinart BFP 703 CE in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cuisinart BFP 703 CE Manual

Product: