723535
36
Zoom out
Zoom in
Previous page
1/39
Next page
CHECK BEFORE ASKING
FOR SERVICE
If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Case Check points
Do the following
When the rice is not cooked.
·Pressure Cook/Turbo “button is pressed?
·Is there power cut while in cooking?
·Press the “Pressure Cook button once. And check
“ ” sign on the display.
·Re-press the “Pressure Cook/Turbo” button.
When the rice is not well
cooked.
·Did you use the measuring cup for the rice?
·Did you put proper amount of water?
·Did you rinse the rice before cooking?
·Did you put rice in water for a long time?
·Is the rice old or dry?
·Refer to page 17-18
·Add water about half the notch and then cook.
Bean (other grains)is half
cooked.
·Is been (other grains) too dry?
·Soak or steam beans and other grains before
cooking in the pressure cooker in order to avoid
partially cooked beans or grains. Beans should be
soaked for -2-minutes or steamed for-2- minutes
prior to cooking, depending on your taste.
Rice is too watery or stiff.
·Is the menu selected correctly?
·Did you properly measure water?
·Did you open the top cover before
cooking was finished?
·Select the correct menu.
·Properly measure water.
·Open the top cover after cooking finished
When the water overflows.
·Did you use the measuring cup?
·Did you use proper amount of water?
·Is the menu selected correctly?
·Refer to page 17-18
When you smell odors while
warming.
·Did you close the top cover?
·Please check it the power cord is plugged.
·Did it warm over 12 hours?
·Is there any other substance such as rice
scoop or cold rice?
·Select the correct menu.
·Properly measure water.
·Open the top cover after cooking finished
Signs show up.
“ ” Signs show up.
“ ”
·Is been (other grains) too dry?
·Temperature sensor or fan motor does
not work properly.
·Unplug the power cord and call the Service center.
Warming passed time mark
blinks during keeping warm.
·24 hours has not passed yet after
Keeping warm
·This function alarms if the rice remained warm
for more than 24 hours.
Rice has gotten cold or a lot of
water flow during Keeping warm
·Keeping warm was set in “Sleeping” mode ·Keep warm after cancelling or setting “Sleep
Keeping Warm” mode depending on the necessity.
If “ ” sign is appears.
·It shows on the display when pressing
“Start” button again, or when the
cooking has finished and you've never
ever open turned the handle to “Unlock”
·It can be solved by turning handle to “Unlock”
and then turn to “Lock”
“ ” sign shows up
·Detachable cover is not mounted ·Mount detachable cover(Refer to page 12)
·If “ ” sign is displayed continuously even
though you already installed detachable
cover, please contact customer service.
Alarm sounds or reheating does
not work while keeping warm
·Is been (other grains) too dry? ·Mount detachable cover(Refer to page 12)
36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuckoo CRP-HZ06 Fuzzy series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuckoo CRP-HZ06 Fuzzy series in the language / languages: English as an attachment in your email.

The manual is 25,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info