723533
30
Zoom out
Zoom in
Previous page
1/39
Next page
30
Controlling method of warming temperature
If the temperature in the oven is not proper, it will smell bad and the color of the rice will change
so make sure to adjust the temperature.
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.
Press “Mode” button over 1 time
during warming. It displays as
picture with buzzer. At the time,
mean current warming
temperature.
“Menu/ Selection” button will brink, and
“Mode”, “Set” and “Cancel” button will b
turned ON.
-1 Press “Menu/Selection” button to
change the temperature as
“Set” button will blink, and “Mode”, “Menu
selection” and “Cancel” button will be turned ON.
To switch the functions continuously, keep
pressing the button.
-2 Press “Menu/Selection” button to
change the temperature as
“Set” button will blink and “Model”,
“Menu/Selection” and “Cancel” buttons will be
turned ON.
To switch the functions continuously, keep
pressing the button.
To raise temperature
After setting temperature, press “Mode”
select button. Preset temperature will
be stored with buzzer sound. (If will be
cancelled once press “Cancel” button or
after 7 seconds without pressing any
button)
In standby mode, push the
“Mode” button 4 times.
The voice says that it is
programmed warming mode,
control the temperature you want.
-1 Press “Menu/Selection” button to
change the Picture (up)
“Set” button will blink, and “Mode”, “Menu
selection” and “Cancel” button will be turned ON.
To switch the functions continuously, keep
pressing the button.
-2 Press “Menu/Selection” button as the
picture (down)
“Set” button will blink and “Model”
“Menu/Selection” and “Cancel” buttons will be
turned ON.
To switch the functions continuously, keep
pressing the button.
Select the menu you want, then the press
the “Mode” button and set-up time will be
automatically entered with a buzzer. (If
you press the “Cancel” button or do not
press a button within 7 seconds, the
Cancelled and returned to standby mode.)
If you want to change cooking temperature in the standby mode, “Mode Select” button over 2 seconds,
and press it 2 more times, You can change cooking temperature.
Change of temperature
1. If too much water is spilled out when you open the lid : Press “Menu/Selection” button to raise the setting mode.
2. If the edge of rice is too soft : Press “Menu/Selection” button to reduce the setting mode.
To lower temperature
➞➞➞➞
➞➞➞➞
TO KEEP COOKED RICE WARM AND TASTY
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuckoo CRP-HY10 Fuzzy series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuckoo CRP-HY10 Fuzzy series in the language / languages: English as an attachment in your email.

The manual is 23,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info