723533

Cuckoo CRP-HY10 Fuzzy series Manual

27
Zoom out
Zoom in
Previous page
1/39
Next page
27
ENGLISH
Check if the current time and the menu are correct.
Refer to page 14 for the time setting.
If the current time is not set correctly, the presetting time will
also be incorrect.
Make sure not to confuse AM and PM.
1
Press the “Preset/AUTO CLEAN” button.
If this function is set at “Turbo Melanoizing”, Cuckoo will display “MY”
on the Display Panel while cooking Nu Rung Ji.
Press the Preset/Auto Clean button once to select the Preset 1. Press
the button twice for the Preset 2.
When Cuckoo is released to the market, Preset 1 is set at 6:30 am and
Preset 2 at 7:00 pm. If you want to accept these preset times, select
Preset 1 and/or Preset 2.
If you press the Preset/Auto Clean button while the Lock/Unlock handle
is unlocked, you will not be able to set the preset time.
If you press the Preset/Auto Cleaning button, the previous preset time
will be displayed as shown in the picture and Preset 1 and Preset 2 will
blink. Then you will hear a voice message: “Please set the cooking
finish time with Menu/Selection button and press Pressure Cook/Turb o
button or Set button.
n GABA mode, preset on “ ”is possible.
If you want to preset “Timer” while keeping warm, cancel keep
warm and preset the “Timer”
2
Preset the time.
3
Press “Pressure Cook/Turbo” button.
“Pressure Cook/Turbo” button will blink, and “Menu/Selection” and
“Cancel” buttons will be turned ON.
It says that preset cook for glutinous is booked
Preset cook will be completed at the timer
Once cook is completed with preset time,
preset time is stored in the memory.Don't need to set up time again.
If a small amount of rice is cooked, cook could be finished earlier
than time you set up.
5
Select menu with “Menu/Selection” button
If you select “Preset/Auto clean” menu with Menu/selection
button, it says “Please, press the “Pressure Cook/Turbo”
button.
“Set button” will blink, and “Menu/Selection”,
“Pressure Cook/Turbo” and “Cancel” buttons will turn ON.
4
How to use timer function
“Set” button will blink, and “Menu/Selection”,
“Cancel” and “Pressure Cook/Turbo” buttons will turn ON.
In case of setting up timer while warming
10min increase by pressing “ ”button
Please set up timer after canceling warming
10min decrease when you press “ ”button
If you keep pressing, It can be changed continuously.
Please be careful not to change from AM to PM.
When preset time is set to AM07:40
HOW TO PREST TIMER FOR COOKING
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuckoo CRP-HY10 Fuzzy series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuckoo CRP-HY10 Fuzzy series in the language / languages: English as an attachment in your email.

The manual is 23,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info