723534
10
Zoom out
Zoom in
Previous page
1/45
Next page
HOW TO CLEAN
-To prevent foul odor clean the top cover assy after the rice cooker has cooled and the rice cooker is unplugged
-Body and cover should be cleaned with a dry dish towel. Do not use betel while using rice cooker, starch can remain.
No effect on health.
-Do not put materials like screws into holes of detachable cover. Check the back cover and front cover.
Wipe the water on the outside and bottom of the
Inner Pot. A rough sponge, a brush or an abrasive
can cause scratches on the coating. Use a
dishwashing liquid and a soft cloth or a sponge.
Keeping the contact area of the Inner Pot with
the pressure packing always clean, increases
the product’s durability.
Inner Pot
While cleaning, make sure the pressure packing
is well in place. Clean it by wiping it gently. If the
pressure packing partially hangs off, press the
part that is hanging back into its original position
with your fingers.
Pressure Packing
Wipe any water on the Inner pot lid with a well
wrung dish cloth. Clean the Inner Pot with care
as it has a metallic edge.
Inner Pot Lid
This part is designed to gather the moisture
coming through the stem vent during cooking.
When the cooking is done, wipe it clean with a
well wrung dish cloth.
Moisture Dishof the Main Body
Keep clean the Steam Vent before and after use.
Steam Vent
Remove gently any substance that might
contaminate the temperature sensor.
Inside of the Main Body
Rubber
packing
contact
surface
1. Handle must be located at “Lock” during Cooking.
The lamp turning on means the top cover is closed perfectly, so you can cook.
2. After cooking, the handle must be turned from
“Lock” to “Unlock”, and then push clamp knob to open.
It is hard to open when there is remaining steam in the Inner pot. At the time,
twist pressure weight and let the steam out. Do not open by force.
3. Handle must be located at “Unlock” when open and close.
If the lamp does not turn on, it would not
operate “Cook” and “Preset” buttons. Make
sure the handle is located at “Lock”.
How to use handle
Proper maintenance of the pressure packing helps keep high airtightness, adds durability to the packing and ensures the taste of the food.
Read the directions below carefully to handle the packing properly.
How to remove and clean the pressure packing
How to handle the Double Motion Packing (Pressure Packing)
The all-stainless cover is not only delamination-free and easy to clean, but it also lasts long,
In addition, CUCKOO’s special stainless CSV-a CUCKOO’s patented technology, improves
the product’s durability and makes it easier to clean.
Unplug the power cord and wait until the
pot cools down before opening the Top
Cover.
After hand washing it with a neutral
cleaning liquid and a sponge, wipe it
clean with a well wrung dish cloth.
To remove the pressure packing, hold it
as shown in the picture and pull it.
1
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuckoo CRP-HW10 Fuzzy Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuckoo CRP-HW10 Fuzzy Series in the language / languages: English as an attachment in your email.

The manual is 13,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info