TO KEEP COOKED RICE WARM AND TASTY
Press “Mode” button over
1 time during warming. It displays
as picture with buzzer. At the
time, means current warming
temperature.
Press “Hour/up” button to change
the temperature as
Press “Minute/Down” button to
change the temperature as
1. If too much water is spilled out when you open the lid : Press “Menu/Selection” button to raise the setting mode.
2. If the edge of rice is too soft : Press “Menu/Selection” button to reduce the setting mode.
Controlling method of warming temperature
If the temperature in the oven is not proper, it smells bad and changes rice color even though it is cleaned
frequently and boiled up. Temperature needs to be set.
Press “Menu/selection” button
to change as the picture(up)
Select the menu you want, then the press the
“My Mode” button and set-up time will be
automatically entered with a buzzer. (If you press
the “Cancel” button or do not press a button
within 7 seconds, the function will be cancelled
and returned to standby mode.)
After setting temperature, press “Mode”
select button. Preset temperature will be
stored with buzzer sound.
(It will be cancelled once press “Cancel”
button or after 7 seconds without
pressing any button.)
Press “Menu/choice” button
as the picture(down)
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
“mode” button 4times.
The voice says that it is
programmed warming mode,
control the temperature you
want.
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.
If you want to change cooking temperature in the standby mode, press “Menu/selection” button over
2 seconds, and press it 2 more times. You can change cooking temperature.
Change of temperature
To raise temperature
To lower temperature
“
Set” button will blink, and
“
Mode”,
“
Menu/Selection” and
“
Cancel ”
buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
“
Set” button will blink, and
“
Mode”,
“
Menu/Selection” and
“
Cancel ” buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
“
Set” button will blink, and
“
Mode”,
“
Menu/Selection” and
“
Cancel ” buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
“
Set” button will blink, and
“
Mode”,
“
Menu/Selection” and
“
Cancel ” buttons will be turned ON.
To switch the functions continuously, keep pressing the button.